Dell Networking 8100, firmware versão 6.2.0.5, A06
Reinicialização necessária Instalado Este arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.2.0.5); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.2.0.5). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.2.0.5.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.2.0.5). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.2.0.5 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.2.0.5) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.2.0.5). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.2.0.5 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.2.0.5) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.2.0.5). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Recomendado
Verificar compatibilidade
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistemaDigite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto. Mostre-me como
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema. O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Correções e aprimoramentos
New Features & Enhancements:
BGPv4 (N3000 and N4000 switches only through CLI)
VRF-Lite (N3000 and N4000 switches only through CLI)
Audio/Video Bridging (N4000 switches only through CLI)
*IEEE 802.1as Timing and Synchronization
*IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP)
*IEEE 802.1ak Multiple Multicast Registration Protocol (MMRP)
*IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP)
RADIUS Change of Authorization (COA)
IPv6 Router Advertisement (RA) Guard
MLAG Enhancements
*Virtual MAC address per MLAG domain
Bidirectional Forwarding Detection (BFD) (N3000 and N4000 switches only through CLI)
IP unnumbered VLAN interfaces
Support Explicit Congestion Notification (ECN) capability
Support to configure storm-control action
Display PIM protocol statistics and multicast forwarding cache
Link de-bounce hysteresis on physical interface link loss.
Buffers command to configure CPU thresholds for messages
Fixes:
CaseID Summary
835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored
845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log.
848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer
852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities
851807 N3048 - Console LED green in GUI even with no console cable attached to it.
856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable"
826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported
854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config
860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present.
862891 VRRP issue between SilverPeak and Dell N3000
852286 N-Series - PCI DSS Compliance
860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce.
826214 PC8164F - Ports down with PHY status as Not Supported
848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping
848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server
844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web.
813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr
848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not.
850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI
839620 N4032F Static IP Routing Issue.
790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer
838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6
873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x
870519 N3048P FW upgrade failure with "can't write fw_env to flash" message
844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7
877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK
859638 N3000 Series - Intermittent switch crash due to bad formatting argument
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes"
Ler maisBGPv4 (N3000 and N4000 switches only through CLI)
VRF-Lite (N3000 and N4000 switches only through CLI)
Audio/Video Bridging (N4000 switches only through CLI)
*IEEE 802.1as Timing and Synchronization
*IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP)
*IEEE 802.1ak Multiple Multicast Registration Protocol (MMRP)
*IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP)
RADIUS Change of Authorization (COA)
IPv6 Router Advertisement (RA) Guard
MLAG Enhancements
*Virtual MAC address per MLAG domain
Bidirectional Forwarding Detection (BFD) (N3000 and N4000 switches only through CLI)
IP unnumbered VLAN interfaces
Support Explicit Congestion Notification (ECN) capability
Support to configure storm-control action
Display PIM protocol statistics and multicast forwarding cache
Link de-bounce hysteresis on physical interface link loss.
Buffers command to configure CPU thresholds for messages
Fixes:
CaseID Summary
835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored
845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log.
848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer
852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities
851807 N3048 - Console LED green in GUI even with no console cable attached to it.
856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable"
826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported
854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config
860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present.
862891 VRRP issue between SilverPeak and Dell N3000
852286 N-Series - PCI DSS Compliance
860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce.
826214 PC8164F - Ports down with PHY status as Not Supported
848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping
848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server
844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web.
813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr
848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not.
850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI
839620 N4032F Static IP Routing Issue.
790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer
838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6
873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x
870519 N3048P FW upgrade failure with "can't write fw_env to flash" message
844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7
877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK
859638 N3000 Series - Intermittent switch crash due to bad formatting argument
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes"
Versão
6.2.0.5, A06
Data da versão
10 mar. 2015
Tipo de download
Sistemas operacionais
Categoria
Rede
Importância
RecomendadaA Dell Technologies recomenda aplicar esta atualização durante o próximo ciclo de atualização programado. A atualização contém alterações para manter a integridade geral do sistema. Ela garante que os softwares do sistema fiquem atualizados e compatíveis com outros módulos do sistema (firmware, BIOS, drivers e software) e pode incluir outros recursos novos.
Formatos disponíveis Ver informações importantes
Formato do arquivo: Extrai arquivos diretamente no disco local
Nome do arquivo: PC8100v6.2.0.5a06.zip
Tamanho do arquivo: 25.39 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este formato de arquivo consiste em um conjunto de arquivos que podem ser descompactados para um diretório no disco rígido. A instalação pode ser feita por esse diretório.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
9cfcf79dc4f247b36a62ef5b43ed64dd
SHA1:
8d5f0520b71595798eab5383fa620730333ccc30
SHA-256:
bfd5e34bd995e03d0751d81cd18bd00e6fb4f25f6ceb94eab50175b5c1984a30
Formato do arquivo: Um arquivo de texto contendo correções fáceis e informações sobre aprimoramentos
Nome do arquivo: PC8100ReadMev6.2.0.5a06.txt
Tamanho do arquivo: 3.19 KB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este formato de arquivo contém texto sem formatação, que pode ser visualizado com um editor de texto padrão.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
a151ebdd37185dc2e5cbd5f8bc572990
SHA1:
e5e49363e2101fe41b59451ba9f5f957b5092067
SHA-256:
beef9cc3ff0d186fdfe060ea7709e4a33dd63e89de93cc2253260135f9896854
Ao fazer o download, você aceita os termos do Contrato de Licença de Software da Dell (em Inglês).
Informações importantes
New Features & Enhancements:
BGPv4 (N3000 and N4000 switches only through CLI)
VRF-Lite (N3000 and N4000 switches only through CLI)
Audio/Video Bridging (N4000 switches only through CLI)
*IEEE 802.1as Timing and Synchronization
*IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP)
*IEEE 802.1ak Multiple Multicast Registration Protocol (MMRP)
*IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP)
RADIUS Change of Authorization (COA)
IPv6 Router Advertisement (RA) Guard
MLAG Enhancements
*Virtual MAC address per MLAG domain
Bidirectional Forwarding Detection (BFD) (N3000 and N4000 switches only through CLI)
IP unnumbered VLAN interfaces
Support Explicit Congestion Notification (ECN) capability
Support to configure storm-control action
Display PIM protocol statistics and multicast forwarding cache
Link de-bounce hysteresis on physical interface link loss.
Buffers command to configure CPU thresholds for messages
Fixes:
CaseID Summary
835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored
845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log.
848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer
852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities
851807 N3048 - Console LED green in GUI even with no console cable attached to it.
856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable"
826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported
854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config
860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present.
862891 VRRP issue between SilverPeak and Dell N3000
852286 N-Series - PCI DSS Compliance
860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce.
826214 PC8164F - Ports down with PHY status as Not Supported
848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping
848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server
844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web.
813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr
848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not.
850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI
839620 N4032F Static IP Routing Issue.
790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer
838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6
873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x
870519 N3048P FW upgrade failure with "can't write fw_env to flash" message
844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7
877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK
859638 N3000 Series - Intermittent switch crash due to bad formating argument
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes"
BGPv4 (N3000 and N4000 switches only through CLI)
VRF-Lite (N3000 and N4000 switches only through CLI)
Audio/Video Bridging (N4000 switches only through CLI)
*IEEE 802.1as Timing and Synchronization
*IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP)
*IEEE 802.1ak Multiple Multicast Registration Protocol (MMRP)
*IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP)
RADIUS Change of Authorization (COA)
IPv6 Router Advertisement (RA) Guard
MLAG Enhancements
*Virtual MAC address per MLAG domain
Bidirectional Forwarding Detection (BFD) (N3000 and N4000 switches only through CLI)
IP unnumbered VLAN interfaces
Support Explicit Congestion Notification (ECN) capability
Support to configure storm-control action
Display PIM protocol statistics and multicast forwarding cache
Link de-bounce hysteresis on physical interface link loss.
Buffers command to configure CPU thresholds for messages
Fixes:
CaseID Summary
835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored
845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log.
848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer
852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities
851807 N3048 - Console LED green in GUI even with no console cable attached to it.
856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable"
826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported
854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config
860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present.
862891 VRRP issue between SilverPeak and Dell N3000
852286 N-Series - PCI DSS Compliance
860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce.
826214 PC8164F - Ports down with PHY status as Not Supported
848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping
848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server
844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web.
813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr
848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not.
850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI
839620 N4032F Static IP Routing Issue.
790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer
838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6
873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x
870519 N3048P FW upgrade failure with "can't write fw_env to flash" message
844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7
877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK
859638 N3000 Series - Intermittent switch crash due to bad formating argument
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes"
Aplica-se a
PowerConnect 8132
PowerConnect 8132F
PowerConnect 8164
PowerConnect 8164F
Instruções de instalação
(1) Download the zip file - PC8100v6.2.0.5a06.zip
(2) Extract the image file "N4000v6.2.0.5.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.2.0.5 Firmware.pdf" extracted from zip file.
Reboot will be required
(2) Extract the image file "N4000v6.2.0.5.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.2.0.5 Firmware.pdf" extracted from zip file.
Reboot will be required
Precisa de ajuda com problemas de conexões de rede?
Encontre uma solução no guia de solução de problemas de rede da DellAjuda e tutoriais para drivers
Para ver mais downloads, vá para Drivers e downloads. Para obter ajuda sobre como usar as informações contidas nesta página, visite Ajuda e tutoriais de driver.