Toshiba THNSN5256GPUK/THNSN5512GPUK/THNSN51T02DUK non-SED Solid State Drive Firmware Update
Este necesară repornirea Instalat Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This package provides the firmware for Toshiba THNSN5256GPUK 256GB, THNSN5512GPUK 512GB, THNSN51T02DUK 1TB non-SED M.2 2280, Revision 5KDA4103, and is supported on Alienware, Inspiron, Latitude, OptiPlex, Precision and XPS models running the following Windows operating systems: Windows 7, Windows 8, Windows 8.1 and Windows 10.
Recomandate
Verificați compatibilitatea
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes:
- Fixed issue encountered in some system where drive is unable to detect after forced power off.
Enhancement:
- Not Applicable
Citiți mai multe- Fixed issue encountered in some system where drive is unable to detect after forced power off.
Enhancement:
- Not Applicable
Versiune
5KDA4103, A00
Data lansării:
28 feb. 2018
Tip de descărcare
Firmware
Categorie
Soluții de stocare
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier ZipPack External
Nume fișier: Toshiba XG4 non-SED 9VNJH_ZPE.exe
Dimensiune fișier: 4.25 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
2118d70202dccc331de65df0841c503a
SHA1:
81a79af597d09b925aaf2e94aad2ef14be443818
SHA-256:
c1a273c04ef0893b1a58394a6dcb55ee0087e201d036ea465cc126591aae25a9
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
WARNING: As with all firmware updates, it is strongly recommended that you backup or make copies of all important files before performing this update. This firmware update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the firmware process is interrupted for any reason, your solid state drive may not function properly.
Sisteme de operare acceptate
Windows 7 pe 32 de biți
Windows 7 pe 64 de biți
Windows 8 pe 32 de biți
Windows 8 pe 64 de biți
Windows 8.1 pe 32 de biți
Windows 8.1 pe 64 de biți
Windows 10 pe 32 de biți
Windows 10 pe 64 de biți
Se aplică pentru
TOSHIBA XG4 1TB PCIE NVME 2280 SSD (CLASS 40)
TOSHIBA XG4 256G PCIE NVME 2280 SSD (CLASS 40)
TOSHIBA XG4 512G PCIE NVME 2280 SSD (CLASS 40)
Instrucțiuni de instalare
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
Procedure
1. Execute the "FW Update tool" by double clicking, you may see below "User Account Control" window based on your Windows system setting. Please Click "Yes" to continue.
2. Double-click the "FW Update tool" to start the firmware update wizard.
Review the License Agreement, If you agree with it, click "I ACCEPT" and then click "Next >".
Tips: You can save EULA (End User License Agreement) by clicking "Save EULA as Text".
3. You will see below welcome window. If you want to continue firmware update operation, then, you need to check warning message carefully. Click "Next >" to continue.
4. "SSD selection window" is displayed like below.
You can't select SSDs which are not targeted on your "FW Update Tool".
(This is just an example for SSD selection. Actual Name may be different on your system.)
(This tool is supported update Firmware by each drive and you can't select 2 or more drives)
5. Please Click "Check Box" to select your firmware updates target drive. Click "Next >" to continue.
6. "Before You Begin window" is displayed like below. If you want to continue firmware update operation, you need to confirm these check items respectively by yourself. If you meet requirements, Click "Yes I did" Check Box to proceed your firmware update on your responsibility. Then, Click "Next >" to continue.
7. Firmware update operation starts automatically. You will see below completion message within a few seconds. Please press "Shutdown" button to execute system power down.
8. Due to execute shutdown operation, below warning message will display before actual shutdown operation.
If your system has unsaved data, please save unsaved data and close all applications respectively.
If your system doesn't start shutdown process automatically, then you need to execute shutdown process manually.
New SSD firmware will be applied when you power on your system next time.
Here is the end of firmware update operation. If you want to check new firmware revision, please execute above operation from 2) to 6). You can see your current firmware revision on your SSD.
------------------------------------------------------------------------------------------
Firmware upgrade through the EFI shell
The installation instruction can be found in the ReadMe.txt after running the ZPE.exe file.
------------------------------------------------------------------------------------------
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
Procedure
1. Execute the "FW Update tool" by double clicking, you may see below "User Account Control" window based on your Windows system setting. Please Click "Yes" to continue.
2. Double-click the "FW Update tool" to start the firmware update wizard.
Review the License Agreement, If you agree with it, click "I ACCEPT" and then click "Next >".
Tips: You can save EULA (End User License Agreement) by clicking "Save EULA as Text".
3. You will see below welcome window. If you want to continue firmware update operation, then, you need to check warning message carefully. Click "Next >" to continue.
4. "SSD selection window" is displayed like below.
You can't select SSDs which are not targeted on your "FW Update Tool".
(This is just an example for SSD selection. Actual Name may be different on your system.)
(This tool is supported update Firmware by each drive and you can't select 2 or more drives)
5. Please Click "Check Box" to select your firmware updates target drive. Click "Next >" to continue.
6. "Before You Begin window" is displayed like below. If you want to continue firmware update operation, you need to confirm these check items respectively by yourself. If you meet requirements, Click "Yes I did" Check Box to proceed your firmware update on your responsibility. Then, Click "Next >" to continue.
7. Firmware update operation starts automatically. You will see below completion message within a few seconds. Please press "Shutdown" button to execute system power down.
8. Due to execute shutdown operation, below warning message will display before actual shutdown operation.
If your system has unsaved data, please save unsaved data and close all applications respectively.
If your system doesn't start shutdown process automatically, then you need to execute shutdown process manually.
New SSD firmware will be applied when you power on your system next time.
Here is the end of firmware update operation. If you want to check new firmware revision, please execute above operation from 2) to 6). You can see your current firmware revision on your SSD.
------------------------------------------------------------------------------------------
Firmware upgrade through the EFI shell
The installation instruction can be found in the ReadMe.txt after running the ZPE.exe file.
------------------------------------------------------------------------------------------
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.