PLDS Optical Disk Drive Firmware Update
Este necesară repornirea Instalat Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This package provides the firmware for PLDSDH-16AES, Revision DD12, and is supported on Inspiron, Vostro, OptiPlex, XPS and Precision models running the following Windows operating systems: Windows 7, Windows 8, Windows 8.1 and Windows 10
Recomandate
Verificați compatibilitatea
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes:
- Improvement for some version of DVDRAM media
Enhancement:
- Not Applicable
Citiți mai multe- Improvement for some version of DVDRAM media
Enhancement:
- Not Applicable
Versiune
DD12, A01
Data lansării:
26 ian. 2016
Tip de descărcare
Firmware
Categorie
Soluții de stocare
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier ZipPack External
Nume fișier: DH-16AES-DD12_ZPE.exe
Dimensiune fișier: 2.6 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
db772077464e23019c120b82cd4ddbdb
SHA1:
cf44ccc24d9b4b2e52eef2dd3ddfb73ab9f3d309
SHA-256:
c5cd1000af1ba3e4a94a3363048223f6469f771cc3b2435d8b5ee88a6356dee6
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
1. Please backup data in the HDD, or at least make copies of all important files stored in the HDDbefore executing this firmware update.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
Sisteme de operare acceptate
Windows 7 pe 32 de biți
Windows 7 pe 64 de biți
Windows 8 pe 32 de biți
Windows 8 pe 64 de biți
Windows 8.1 pe 32 de biți
Windows 8.1 pe 64 de biți
Windows 10 pe 32 de biți
Windows 10 pe 64 de biți
Se aplică pentru
ASSY,DVD+/-RW,16X,HH,BARE,PLDS
Instrucțiuni de instalare
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
ATTENTION
1. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the Warning windows, select "Yes".
3. On the Flash Program for... windows, if the target ODD is not listed, select it and then click "Update".
4. Firmware upgrade will proceed. When the firmware upgrade process completes, it will prompt a successful message, click "Yes".
5. On the Reboot Warning windows, you can click "Now" to reboot operating system.
6. Go into the Windows, to confirm the firmware update was successful, open device manager -> open ODD -> click Properties -> choose hardware ID under Details and check the firmware version.
------------------------------------------------------------------------------------------
Firmware upgrade through the DOS utility
ATTENTION
1. Switch AC Power.
2. The DOS utility supports only Intel systems.
Procedure
1. Boot your system into DOS from USB or CD/DVD drive (for instructions, please refer to the manual that came with your system).
2. Go into the Dos sub-directory execute the DOS utility.
3. Scanning target ODD then press "Y" of the keyboard.
4. On the Flash Program for... windows, if the target ODD is not listed, select number of the target ODD.
5. Firmware upgrade will proceed. When the firmware upgrade process completes, it will prompt a successful message.
6. You can press "Y" of the keyboard to reboot operating system.
7. To confirm the firmware update was successful, boot your system into Windows then open Device manager -> open ODD -> click Properties -> choose hardware ID under Details and check the firmware version.
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
ATTENTION
1. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the Warning windows, select "Yes".
3. On the Flash Program for... windows, if the target ODD is not listed, select it and then click "Update".
4. Firmware upgrade will proceed. When the firmware upgrade process completes, it will prompt a successful message, click "Yes".
5. On the Reboot Warning windows, you can click "Now" to reboot operating system.
6. Go into the Windows, to confirm the firmware update was successful, open device manager -> open ODD -> click Properties -> choose hardware ID under Details and check the firmware version.
------------------------------------------------------------------------------------------
Firmware upgrade through the DOS utility
ATTENTION
1. Switch AC Power.
2. The DOS utility supports only Intel systems.
Procedure
1. Boot your system into DOS from USB or CD/DVD drive (for instructions, please refer to the manual that came with your system).
2. Go into the Dos sub-directory execute the DOS utility.
3. Scanning target ODD then press "Y" of the keyboard.
4. On the Flash Program for... windows, if the target ODD is not listed, select number of the target ODD.
5. Firmware upgrade will proceed. When the firmware upgrade process completes, it will prompt a successful message.
6. You can press "Y" of the keyboard to reboot operating system.
7. To confirm the firmware update was successful, boot your system into Windows then open Device manager -> open ODD -> click Properties -> choose hardware ID under Details and check the firmware version.
Ajutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.