Dell Networking 8100, Firmware Version 6.5.2.18
Este necesară repornirea Instalat Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.5.2.18); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.5.2.18). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.5.2.18.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.5.2.18). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.5.2.18_6.5.2.48_Release_Notes(N1500_N2000_N3000_N3000E-ON_N4000_PC8100).pdf".
Please follow software update instructions included in the zip file - "Upgrading Dell EMC Networking 8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.5.2.18.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.5.2.18) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.5.2.18). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.5.2.18_6.5.2.48_Release_Notes(N1500_N2000_N3000_N3000E-ON_N4000_PC8100).pdf".
Please follow software update instructions included in the zip file - "Upgrading Dell EMC Networking 8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.5.2.18.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.5.2.18) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.5.2.18). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Recomandate
Verificați compatibilitatea
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes:
FIELD-3209/CS6218881-IP Phone on dot1x enabled port drops 20 to 30 seconds after initialization.
FIELD-3192/CS6161169-Some lines of startup-config are missed out when copied to TFTP server.
FIELD-FEDERAL/CS6270871-Mandatorily adding the "remove-private-as" neighbor statements to VRFs.
FIELD-3281/CS6328995-Unable to configure BGP Neighbor with specific IP addresses.
FIELD-3193/CS6155318-MLAG Ports Down on VPC Secondary after Power Cycle.
FIELD-3202/CS6219076-Excessive multicast traffic hitting CPU causes ARP issue.
General mode "tagged VLAN" is not removed from "show interface switchport" command when configured in interface range mode.
Enhancements:
None
Citiți mai multeFIELD-3209/CS6218881-IP Phone on dot1x enabled port drops 20 to 30 seconds after initialization.
FIELD-3192/CS6161169-Some lines of startup-config are missed out when copied to TFTP server.
FIELD-FEDERAL/CS6270871-Mandatorily adding the "remove-private-as" neighbor statements to VRFs.
FIELD-3281/CS6328995-Unable to configure BGP Neighbor with specific IP addresses.
FIELD-3193/CS6155318-MLAG Ports Down on VPC Secondary after Power Cycle.
FIELD-3202/CS6219076-Excessive multicast traffic hitting CPU causes ARP issue.
General mode "tagged VLAN" is not removed from "show interface switchport" command when configured in interface range mode.
Enhancements:
None
Versiune
6.5.2.18, A43
Data lansării:
16 nov. 2018
Tip de descărcare
Sisteme de operare
Categorie
Rețea
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Extrage fișiere direct pe discul local
Nume fișier: PC8100v6.5.2.18.A43.zip
Dimensiune fișier: 55.14 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
dfc8d740e3a120aa7febc2c1f93145a8
SHA1:
21aa6982de1631f89c063460b58b7d683e6b4028
SHA-256:
a7d28db39eaf85f5cfdf18c64abbd98d6d216934c6e03bbe6ef42e7bf7f272f2
Format fișier A text file containing customer friendly fixes and enhancements information
Nume fișier: PC8100ReadMev6.5.2.18.A43.txt
Dimensiune fișier: 3.23 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
b67a816aca01994e0a843a5e554c48fe
SHA1:
502fc761e711bc1f844b4505c555e33ad74cda66
SHA-256:
d5525312cc4838a3cfad8b8a5737597718d2346fdc10b38ea7656c4c1206d7ad
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
Fixes:
FIELD-3209/CS6218881-IP Phone on dot1x enabled port drops 20 to 30 seconds after initialization.
FIELD-3192/CS6161169-Some lines of startup-config are missed out when copied to TFTP server.
FIELD-FEDERAL/CS6270871-Mandatorily adding the "remove-private-as" neighbor statements to VRFs.
FIELD-3281/CS6328995-Unable to configure BGP Neighbor with specific IP addresses.
FIELD-3193/CS6155318-MLAG Ports Down on VPC Secondary after Power Cycle.
FIELD-3202/CS6219076-Excessive multicast traffic hitting CPU causes ARP issue.
General mode "tagged VLAN" is not removed from "show interface switchport" command when configured in interface range mode.
Enhancements:
None
FIELD-3209/CS6218881-IP Phone on dot1x enabled port drops 20 to 30 seconds after initialization.
FIELD-3192/CS6161169-Some lines of startup-config are missed out when copied to TFTP server.
FIELD-FEDERAL/CS6270871-Mandatorily adding the "remove-private-as" neighbor statements to VRFs.
FIELD-3281/CS6328995-Unable to configure BGP Neighbor with specific IP addresses.
FIELD-3193/CS6155318-MLAG Ports Down on VPC Secondary after Power Cycle.
FIELD-3202/CS6219076-Excessive multicast traffic hitting CPU causes ARP issue.
General mode "tagged VLAN" is not removed from "show interface switchport" command when configured in interface range mode.
Enhancements:
None
Se aplică pentru
PowerConnect 8132
PowerConnect 8132F
PowerConnect 8164
PowerConnect 8164F
Instrucțiuni de instalare
(1) Download the zip file - PC8100v6.5.2.18.A43.zip
(2) Extract the image file "N4000v6.5.2.18.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking 8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.5.2.18.pdf" extracted from zip file.
(2) Extract the image file "N4000v6.5.2.18.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking 8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.5.2.18.pdf" extracted from zip file.
Aveți nevoie de ajutor cu problemele de conexiune la rețea?
Găsiți o soluție în ghidul de depanare a rețelei de la DellAjutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.