LSI Logic CERC ATA 100, v.Linux Utilities, A04

Default Instructions for lin_apps_a04.tar.gz:

Default Instructions for lin_apps_a02.tar.gz:

Instructions for downloading and creating an applications diskette:
===================================================================
You will need a formatted 3 1/2 inch floppy diskette for the following
procedure. Download the file .tar.gz to a temporary directory on your
working system. Extract the file to the floppy disk as follows:

1. On a Linux system:

Type the following commands under a Linux command shell:
mount /dev/fd0 /mnt/floppy
tar xvzf -C /mnt/floppy

umount /mnt/floppy
This will extract all the .rpms onto the floppy

Installation of Dellmgr
=======================
1.On a linux system
To install, enter the following on the command line where the
individual rpm are located.:
rpm -ivh dellmgr-5.22-0.i386.rpm

This will install following two files in the /usr/sbin directory

dellmgr : Script to call configuration utility binary
(dellmgr.bin)
dellmgr.bin : Binary for configuration utility

After installation type "dellmgr" to start the utility.
To uninstall the rpm:
rpm -e dellmgr-5.22-0

Installation of Linflash
========================
Copy linflash-2.14-0.i386.rpm to local directory and type at prompt
#rpm -i linflash-2.14-0.i386.rpm

You must copy the firmware image to the same directory for the linux
flash utility to work.
Create a diskette image of the firmware and copy the .rom file to the
same directory as linflash.

To run the rpm type
#linflash
At the command prompt.

Usage : linflash [-r] [-p] [-s] [-i [file] [file] [...]] [-f [file]
[file] [...]]

-r : Flash without asking for user input to flash adapter(s).
-p : Prompt user for filename. Flash without checking for signatures.
-s :Silent flash. First matching image file will be taken for each
adapter.
-i : Ignore the following files. These files will not be considered for
flashing the matching controllers.
-f : Force the following files To be flashed for the matching controller.
In case more than one matching files are specified, the first one
would be taken.

Installation procedure for Megamon
===================================
To install, enter the following on the command line:
rpm -ivh Megamon-3.6-0.i386.rpm

For email notification edit /var/log/raidmon.lst file. See details in the
header section of this file

To start the monitoring service:
/etc/rc.d/init.d/raidmon start

To stop the monitoring service:
/etc/rc.d/init.d/raidmon stop

To restart the monitoring service:
/etc/rc.d/init.d/raidmon [restart|reload]

To uninstall the rpm:
rpm -e megamon-3.6-0

Installation procedure for DELL PERC SNMP Agent for Linux
=========================================================
If RPM support is there, install DELL PERC SNMP Agent using
rpm -i percsnmp-4.06-1.i386.rpm

Note:
If you have installed previous release of percsnmp
please uninstall the older one,by running
rpm -e percsnmp
Then proceed to install the new release.

If there is no support for RPM , follow the following procedures:

Untar the DELL PERC SNMP Agent tar package and then

$tar -zxf percsnmp-4.06-1.tgz
$cd percsnmp
$./install