Dell OptiPlex 3050 System BIOS

Vyžaduje sa reštart

Počas aktualizácie systému BIOS nevypínajte počítač ani ho neodpájajte od zdroja napájania, pretože by ste ho mohli poškodiť. Počas aktualizácie sa váš počítač reštartuje a na okamih sa môže zobraziť čierna obrazovka.

Pred aktualizáciou si prečítajte pokyny na inštaláciu a dôležité informácie uvedené nižšie.

ID ovládača : 3M95V

Dôležitosť : Kritická

Verzia : 1.11.0, 1.11.0 Najnovšia verzia Odporúčaná verzia Najnovšia a odporúčaná verzia

Dátum vydania : 26 nov 2018

Typ súboru na prevzatie : Systém BIOS

Kategória : Systém BIOS

This package contains the Dell system BIOS update for Dell OptiPlex 3050 Tower, OptiPlex 3050 Small Form Factor and OptiPlex 3050 Micro that runs the Windows operating system. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices. This update fixes the issue where the Intel Fast Call feature will not start during boot and addresses the issue where the system may reboot continuously after restoring custom setting on an Intel Platform Trust Technology supported system. It includes the latest firmware that addresses the Intel Security Advisories.

Stiahnuť súbory

Formát súboru: Tento formát súboru pozostáva zo spustiteľného súboru systému BIOS. Univerzálny formát (Windows/MS DOS) je možné použiť na inštaláciu z akéhokoľvek prostredia systému Windows alebo MS DOS.

Názov súboru: OptiPlex_3050_1.11.0.exe

Veľkosť súboru: 16.99 MB

Ak chcete skontrolovať neporušenosť prevzatého súboru, overte kontrolný súčet.

MD5: e8c61d04e4c4d14c0cb6e46a5ea2229d

SHA1: de93918cc6fcc1e37a480b175f9d129b6144506b

SHA-256: c878cae395b2cce40f2798d1b9cb2adadae64a3454a8dad817d82909e339dbd4

Stiahnuť .EXE

Opravy a vylepšenia

Fixes:
- Addressed Auto Wake issue when system is turned off from boot menu.
- Addressed add-in card compatibility.
- Addressed PCIe compatibility.
- Fixed the issue where the Intel Fast Call feature does not start during boot. Fast call is a feature that enables the network infrastructure of IT departments to support secure access from the internet to the corporate network.
- Addressed missing setup page via remote connection.
- Fixed the TPM startup error under TPM enabled condition when the system resumes from sleep mode.
- Addressed string mismatch between application and BIOS setup.
- Addressed memory reduction issue.
- Fixed a potential issue where the system stops responding when an incorrectly formatted password is entered in the BIOS Security Manager (BIOS pre-boot password) screen.
- Fixed a potential issue with binary image measurement using the Linux UEFI shim boot loader.
- Update Intel ME Firmware to address security advisories INTEL-SA-00125 (CVE-2018-3655), Intel-SA-00131 (CVE-2018-3643 CVE-2018-3644) & INTEL-SA-00141 (CVE-2018-3657 CVE-2018-3658 CVE-2018-3616)
- Removed BIOS update option in DOS environment.
- Fixed the issue with data wipe feature in BIOS.

Enhancements:
- Updated Intel ME Firmware to address security advisories INTEL-SA-00112 (CVE-2018-3628 CVE-2018-3629 CVE-2018-3632) & INTEL-SA-00118 (CVE-2018-3627).
- Updated CPU microcode to address security advisory Intel Security Advisory INTEL-SA-00115. (CVE-2018-3639 & CVE-2018-3640).
- Added TPM PPI Bypass for Clear Command support.
- Enhanced system security.
- Improved system stability.
- Supports dust filter reminder feature.
- Enhanced BIOS Auto Recovery feature.

Pokyny na inštaláciu

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Dell OptiPlex 3050 System BIOS

Stiahnuť súbory

Opravy a vylepšenia

Dôležité informácie

Systémy

Operačné systémy

Pokyny na inštaláciu

Vzťahuje sa na