Počas aktualizácie systému BIOS nevypínajte počítač ani ho neodpájajte od zdroja napájania, pretože by ste ho mohli poškodiť. Počas aktualizácie sa váš počítač reštartuje a na okamih sa môže zobraziť čierna obrazovka.
Pred aktualizáciou si prečítajte pokyny na inštaláciu a dôležité informácie uvedené nižšie.
Alienware 17 System BIOS
Vyžaduje sa reštart Nainštalované Tento súbor bol automaticky nainštalovaný ako súčasť nedávnej aktualizácie. Ak máte nejaké problémy, môžete si ho stiahnuť a znova nainštalovať manuálne.Obsah tejto stránky mohol byť preložený automaticky. Ak máte k prekladu nejaké pripomienky, vyplňte formulár v spodnej časti stránky.
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisory INTEL-SA-00115. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
Odporúčané
Skontrolujte kompatibilitu
Ak chcete zobraziť informácie o najnovších ovládačoch pre váš systém, zadajte požadované informácie o svojom produkte.Zadajte servisný tag alebo model svojho zariadenia Dell
Chcete vyhľadať svoj produkt? Zadajte identifikačné číslo produktu. Ukážte mi, ako na to
Tento ovládač nie je kompatibilný
Tento ovládač nie je určený pre zvolený produkt. Ak chcete zobraziť všetky ovládače pre iný produkt, vyberte iný produkt, znova zadajte požadované informácie o svojom produkte alebo navštívte stránku podpory pre produkty.
Ak chcete použiť automatické skenovanie, prihláste sa do systému Windows ako správca. Ak sa vám toto hlásenie zobrazuje napriek tomu, že ste sa prihlásili ako správca, reštartujte počítač. Vaše zariadenie spravuje váš správca IT, preto môže byť dostupnosť funkcií obmedzená.
Vyhľadajte ďalšie aktualizácie. Použite SupportAssist na vyhľadanie najnovších aktualizácií ovládačov.
Opravy a vylepšenia
- Firmware updates to address the Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639, and CVE-2018-3640).
Viac informáciíVerzia
A16, A16
Dátum vydania
15 nov 2018
Typ súboru na prevzatie
Systém BIOS
Kategória
Systém BIOS
Dôležitosť
KritickáDell Technologies dôrazne odporúča nainštalovať túto dôležitú aktualizáciu čo najskôr. Aktualizácia obsahuje dôležité opravy chýb a zlepšenia v oblasti funkčnosti, spoľahlivosti a stability vášho zariadenia Dell. Súčasťou môžu byť aj opravy zabezpečenia a ďalšie zlepšenia funkcií.
Dostupné formáty Zobraziť dôležité informácie
Formát súboru: CPG BIOS – spustiteľný súbor pre systém Windows/DOS
Názov súboru: VAS00A16.exe
Veľkosť súboru: 10.79 MB
Tento súbor je veľký. Ak máte pomalšie pripojenie na internet, sťahovanie môže trvať trochu dlhšie.
Popis formátu:
Tento formát súboru pozostáva zo spustiteľného súboru systému BIOS. Univerzálny formát (Windows/MS DOS) je možné použiť na inštaláciu z akéhokoľvek prostredia systému Windows alebo MS DOS.
Ak chcete skontrolovať neporušenosť prevzatého súboru, overte kontrolný súčet.
MD5:
af303d39b7f9ba04ee41786cefcfc008
SHA1:
826bca6fa49d8bc639a3d909e1f584e310670d14
SHA-256:
1e1f2ea221a9f5fd2fad9dedaafec247f550ef0965d2fbfc163255d024d4b13e
Prevzatím súborov vyjadrujete súhlas s podmienkami Softvérovej licenčnej zmluvy so spoločnosťou Dell. (v angličtine)
Dôležité informácie
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Operačné systémy
Systém BIOS
Vzťahuje sa na
Dell Alienware 17 System BIOS
Pokyny na inštaláciu
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Alienware_17_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Alienware_17_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
8. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
9. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Save Changes and reboot the system.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Alienware_17_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Alienware_17_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
8. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
9. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Save Changes and reboot the system.
Potrebujete pomoc s problémami systému BIOS?
Nájdite riešenie v sprievodcovi spoločnosti Dell na riešenie problémov so systémom BIOSPomocník a kurzy k ovládačom
Ďalšie súbory na prevzatie nájdete na stránke Ovládače a súbory na prevzatie Pomoc s používaním informácií na tejto stránke nájdete na stránke Pomocník a kurzy k ovládačom