Dell OptiPlex 7050 System BIOS

Vyžaduje sa reštart

Počas aktualizácie systému BIOS nevypínajte počítač ani ho neodpájajte od zdroja napájania, pretože by ste ho mohli poškodiť. Počas aktualizácie sa váš počítač reštartuje a na okamih sa môže zobraziť čierna obrazovka.

Pred aktualizáciou si prečítajte pokyny na inštaláciu a dôležité informácie uvedené nižšie.

ID ovládača : NWWCH

Dôležitosť : Kritická

Verzia : 1.13.5, 1.13.5 Najnovšia verzia Odporúčaná verzia Najnovšia a odporúčaná verzia

Dátum vydania : 24 jún 2020

Typ súboru na prevzatie : Systém BIOS

Kategória : Systém BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisories INTEL-SA-00241, INTEL-SA-00219, INTEL-SA-00220, INTEL-SA-00270, INTEL-SA-00260, INTEL-SA-00254, INTEL-SA-00289, INTEL-SA-00295, INTEL-SA-00322, and INTEL-SA-00329. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Stiahnuť súbory

Formát súboru: Tento formát súboru pozostáva zo spustiteľného súboru systému BIOS. Univerzálny formát (Windows/MS DOS) je možné použiť na inštaláciu z akéhokoľvek prostredia systému Windows alebo MS DOS.

Názov súboru: OptiPlex_7050_1.13.5.exe

Veľkosť súboru: 17.58 MB

Ak chcete skontrolovať neporušenosť prevzatého súboru, overte kontrolný súčet.

MD5: 570288fcd061a3b41bca74a908a895a1

SHA1: 0c140f5df34d9a7fa7ffd07e4c6b56201bc71d4e

SHA-256: b0c987b2a49117ecb352665646901f034f133a1848ac7a740167bf90e7df06ee

Stiahnuť .EXE

Opravy a vylepšenia

Fixes:
- Fixed the issue where some security settings in the BIOS setup are set to the default value. This issue occurs when the RTC reset is performed when there is an admin password.
- Fixed the issue where the Trusted Platform Module (TPM) not found error is displayed during the Power-On Self-Test (POST). This error is logged in BIOS event log.
- Firmware updates to address the Intel Security Advisory INTEL-SA-00241 (CVE-2019-0169, CVE-2019-11104, CVE-2019-11090, CVE-2019-0168, CVE-2019-11087, CVE-2019-11101, CVE-2019-11106, and CVE-2019-11147)
- Firmware updates to address the Intel Security Advisories INTEL-SA-00219 (CVE-2019-0117), INTEL-SA-00220 (CVE-2019-0123), and INTEL-SA-00270 (CVE-2019-11135).
- Firmware updates to address the Intel Security Advisories INTEL-SA-00260 (CVE-2019-0154) and INTEL-SA-00254 (CVE-2019-0185).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00289 (CVE-2019-11157).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00295 (CVE-2020-0531, CVE-2020-0532, CVE-2020-0533, CVE-2020-0535, CVE-2020-0536, CVE-2020-0537, CVE-2020-0538, CVE-2020-0539, CVE-2020-0540, CVE-2020-0545, CVE-2020-0594, CVE-2020-0595, CVE-2020-0596, and CVE-2020-8674).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00322 (CVE-2020-0528 and CVE-2020-0529).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00320 (CVE-2020-0543)/ INTEL-SA-00329 (CVE-2020-0548 and CVE-2020-0549).
- Firmware updates to address CVE-2020-5362.

Enhancements:
- Added an enhancement to extend the BIOS password configuration measurements into the TPM.
- Added a new feature to automatically suspend BitLocker before upgrading the firmware. After the firmware upgrade is complete, BitLocker is automatically enabled.

Pokyny na inštaláciu

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Dell OptiPlex 7050 System BIOS

Stiahnuť súbory

Opravy a vylepšenia

Dôležité informácie

Systémy

Operačné systémy

Pokyny na inštaláciu

Vzťahuje sa na