Dell Networking N3000 Series, Firmware Version 6.3.2.4, CPLD Ver. 15.Please select "View details" link for more details of CPLD Upgrade and other fixes.
InstalleradDen här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Dell Networking N3000 Ethernet Switch can run as Access Router or Aggregation Router based on the Firmware downloaded and run. The Firmware N3000_BGPv6.3.x.x.stk provides BGP functionality and N3000_N2000v6.3.x.x.stk features Web interface, OpenFlow, iSCSI, GARP, GVRP, GMRP, Auto-VoIP, DVLAN, MVR, and MLAG. Only the listed features are mutually exclusive while other features exist in both the variants of the builds. Please note the feature requirement and select the Firmware to download and run on N3000 Ethernet switch. Please note that since the features present in one variant of the firmware does not exist in other variant, the configuration specific to those exclusive features will fail configuration migration when switching between the firmware variants on N3000 Ethernet switch.
New CPLD version 15 is available in this release for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.3.2.4, the CPLD can be updated to version 15 from CLI using the command - 'update cpld'. To update CPLD on stack members, run - 'devshell cpldUpdate' command from serial console. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, it's required to do manual switch power-cycle. Verify CPLD Version with the command - 'show version' from CLI after power-cycle.
**Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.3.2.4 and CPLD Version 15 and attempt to downgrade to any prior FW version**
Downgrading N3000 and N2000 Series switches from firmware version 6.3.2.4 with the updated CPLD version 15 to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2 (N3000_N2000vB.6.3.2.stk or N3000_BGPvB.6.3.32.stk) attached to zip file. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.2.4 Firmware" procedure.
Rekommenderat
Kontrollera kompatibilitet
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt system
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare.Visa mig hur
Inga resultat hittades. Vi kunde inte hitta något som matchade din sökning. Ändra din sökning så att du anger en service tag (B959FS3) eller modell (Latitude 5540) och försök igen.
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om.Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Fixes: PSE037997: N-Series-DHCP doesn't work properly when port-channel is in place. CSP1126873: N3000P-Failed to power up spare pair Gi1/0/1 error message every few seconds. CSP1135150: N4000 Null MAC entries in ARP table at the core-switch for end hosts reachable via port-channel interface. FIELD-2234, 2249,2205, 2284: N3000 PSU failures reported on multiple switches. CSP1132203: New PoE FW Update for N15XXP switch.
Dell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Fixes: PSE037997: N-Series-DHCP doesn't work properly when port-channel is in place. CSP1126873: N3000P-Failed to power up spare pair Gi1/0/1 error message every few seconds. CSP1135150: N4000 Null MAC entries in ARP table at the core-switch for end hosts reachable via port-channel interface. FIELD-2234, 2249,2205, 2284: N3000 PSU failures reported on multiple switches. CSP1132203: New PoE FW Update for N15XXP switch.
Enhancements: None
Disabled weak ciphers (arcfour, arcfour128, arcfour256, aes256-cbc,aes192-cbc,aes128-cbc,twofish-cbc,blowfish-cbc,3des-cbc) to avoid security vulnerabilities in firmware version 6.3.2.4 and later. Customers are required to use the latest SSH client (terminal emulators) which supports CTR ciphers: aes128-ctr, aes192-ctr, aes256-ctr, chacha20-poly1305.
(1) Download the zip file - N3000v6.3.2.4a26.zip (2) Extract the image file "N3000_N2000v6.3.2.4.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.2.4 Firmware.pdf" extracted from zip file.
Behöver du hjälp med problem som rör nätverksanslutning?
Hitta en lösning i Dells felsökningsguide för nätverk