Dell Networking N2000 Series, Firmware Version 6.3.3.14
Omstart krävsDrivrutin-ID : 5R9G6
Prioritet : Rekommenderas
Version : 6.3.3.14, 6.3.3.14 Senaste version Rekommenderad version Senaste och rekommenderade versionen
Utgivningsdatum : 09 feb. 2018
Hämtningstyp : Firmware
Kategori : Nätverk
Both Dell Networking N2000 and N3000 Series switches share the same firmware image file (N3000_N2000v6.3.3.14.stk). If your N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware 6.3.3.10 as it contains multiple bug fixes.
New CPLD version 17 is available in release 6.3.3.9 and later (6.3.3.14) for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.3.3.9 and later (6.3.3.14), the CPLD can be updated to version 17 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'devshell cpldUpdate' command from serial console. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.
****Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.3.3.14 and CPLD Version 15 or 17 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.3.3.14 with the updated CPLD version 15 or 17 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.3.14 Firmware" procedure.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.3.14_Release_Notes".
New CPLD version 17 is available in release 6.3.3.9 and later (6.3.3.14) for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.3.3.9 and later (6.3.3.14), the CPLD can be updated to version 17 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'devshell cpldUpdate' command from serial console. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.
****Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.3.3.14 and CPLD Version 15 or 17 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.3.3.14 with the updated CPLD version 15 or 17 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.3.14 Firmware" procedure.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.3.14_Release_Notes".
Hämta filer
Filformat: Det här filformatet innehåller oformaterad text som kan visas med en vanlig textredigerare.
Filnamn: N2000ReadMev6.3.3.14a33.txt
Filstorlek: 3.16 KB
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5: 32bd7220df46074af3c5b8105e1afc58
SHA1: c96c6d7d945f5f0a006eb65c26484234de67c7e6
SHA-256: adaa98ecd1744e3941e5302acc83cbc6c570855096b1f0caf696bafa13725319
Filformat: Det här filformatet består av ett arkiv av filer som kan packas upp i en katalog på hårddisken. Installationen kan sedan göras från den katalogen.
Filnamn: N2000v6.3.3.14a33.zip
Filstorlek: 57.42 MB
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5: 5678564c460c950d1bfd4865339f1e04
SHA1: d4321241632a6f516cbb88b4b27a79a56494d05e
SHA-256: b560d140e745307fab5ecc8b35da566771a3684fafb8afac0318a0b8bd0b4d4a
Ange ett service tag-nummer
Ange ditt unika service tag-nummer för att säkerställa att de nedladdningar som visas är specifika för din enhet.