Hämta filer
Filformat: Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Filnamn: A02-SPL.EXE
Filstorlek: 410.45 KB
Filformat: Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och dubbelklicka sedan på den för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Filnamn: SPL-A02.EXE
Filstorlek: 385.14 KB
Filformat: Det här filformatet innehåller oformaterad text som kan visas med en vanlig textredigerare.
Filnamn: SPL-A02.TXT
Filstorlek: 1.38 KB
Korrigeringar och förbättringar
Viktig information
This utility requires a floppy disk drive.
Installationsanvisningar
Floppy Disk Boot to Disk for SPL-A02.EXE
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Default Instructions for SPL-A02.TXT:
This is a standard text file containing a list of fixes and enhancements
included in this release.
Default Instructions for A02-SPL.EXE:
Download
1. Click Download Now, to download the file.
2. At the Export Compliance Disclaimer window, click Yes, I Accept
this Agreement.
3. When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file
name icon appears on your desktop.
Install
1. Double-click the new icon on the desktop labeled A02-SPL.EXE.
The Self-Extractor window appears.
2. Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R55037.
3. Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R55037 files
were
extracted.
4. Click OK.
Follow the on-screen installation instructions in the window.