Dell OptiPlex 3046 System BIOS

Omstart krävs

Stäng inte av datorn eller koppla från strömkällan medan BIOS uppdateras. Annars kan datorn skadas. Under uppdateringen kommer datorn att startas om och en svart skärm kan visas en kort stund.

Läs installationsanvisningarna och den viktiga informationen nedan innan du uppdaterar.

Drivrutin-ID : KYCMJ

Prioritet : Kritisk

Version : 1.7.0, 1.7.0 Senaste version Rekommenderad version Senaste och rekommenderade versionen

Utgivningsdatum : 11 apr. 2019

Hämtningstyp : System-BIOS

Kategori : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel security advisory INTEL-SA-00185. A security advisory is a statement when a product is impacted by a security vulnerability and a remedy is available.

Hämta filer

Filformat: Det här filformatet består av en körbar BIOS-fil. Det universella formatet (Windows/MS DOS) kan användas för installation från alla Windows- eller MS DOS-miljöer.

Filnamn: OptiPlex_3046_1.7.0.exe

Filstorlek: 5.65 MB

Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.

MD5: c4022755a47c96b8743022eac821c2a2

SHA1: a12bcfe2e7cce5e2201971a33f1774d11c387247

SHA-256: a0441b72d29f130c656e81c1675619ff242509fbe98f5b9a569c6c96618554fa

Hämta .EXE

Installationsanvisningar

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes and reboot the system.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Update in the section.
6. Click Flash from file to browse the USB drive to locate the downloaded file.
7. Select the file and click Submit.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Update BIOS.
10. Review the Warning message and click Confirm Update BIOS! to proceed with the update.
The system restarts and displays a progress bar at the Dell logo screen. The system restarts again when the update is complete.

Dell OptiPlex 3046 System BIOS

Hämta filer

Korrigeringar och förbättringar

Kompatibla system

Operativsystem som stöds

Installationsanvisningar

Gäller