AUTOMATISKT INSTALLERADDen här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Adaptec 39160 SCSI Controller BIOS
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt system
Sök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare.Visa mig hur
Inga resultat hittades. Vi kunde inte hitta något som matchade din sökning. Ändra din sökning och försök igen.
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om.Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Fixed issue: Booting to utility partition hangs on PE4400, PE2450, and PE1400 when 39160 is connected to hard drives.
Dell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
NOTE: You will need a pre-formatted DOS boot floppy to extract to and run these files from. DOS 6.22 is recommended
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Insert bootable floppy into floppy drive. 3. Specify the drive letter of your floppy drive as the location to unzip the files. 4. Click on the unzip button to extract files.
Install FW 1. Boot system from the DOS bootable floppy diskette with extracted files from step 4 above. 2. Type the following command under DOS command to flash the BIOS: Flash4.exe -w 39160.rom This command will flash BIOS (39160.rom) to all adapters in the system that have the same model. After successfully flashing BIOS, the utility returns status code 0. 3. Restart the system and verify that the adapter posts the correct BIOS banner during system booting up.
Additional Notes: If there are some other adapter models in the system besides the ones you want to flash, the flash utility will return status code 13: Unable to flash some of the host adapters after flashing. Ignore this error status since flashing to the required adapters has been successfully finished and the BIOS of those other adapter models are not changed.
For more information on the flash4 utility, please read interfac.doc that is included in this diskette.