LSI Logic CERC ATA 100, v. Linux utilities, A00

This software download includes the following Red Hat Linux utilites for
CERC ATA100/4CH:
.dellmgr-5.16-0.i386.rpm is a Linux array management utility tool for CERC
ATA100/4CH.
.linflash-2.05-0.i386.rpm is a firmware flashing application from within
Red Hat Linux 7.1SBE or later for CERC ATA100/4Ch on 32-bit Intel
Architecture systems.
.megamon-3.0-0.i386.rpm is a CERC ATA100/4CH status monitoring tool for
Linux Red Hat 7.1SBE or later. It emails root the status of the controller.
.megarac-1.00-0.i386.rpm is a command line based RAID configuration
utility for CERC ATA100/4CH. This utility configures the Raid Adapter in a
non-interactive mode. It configures a single adapter at a time, based on
command line options given by the user.
.percsnmp-4.02-1.i386.rpm is megaraid (driver for PERC3/QC, PERC3/DC,
PERC3/DCL, PERC2/DC, PERC2/SC, and CERC ATA100/4CH) SNMP agent for Linux
Red Hat 7.1SBE or later. The agent will get the information as per SNMP
Manager's request about the MegaRAID adapters, Logical drives, Physical
drives and Channel information. It can also set some of the properties of
the MegaRAID Controller. This agent will generate Traps to the
destinations given in the configuration File mrdsnmp.conf if any state of
change occurs.