Hämta filer
Filformat: Det här filformatet består av en BIOS-körbar fil. Om du vill uppdatera ditt system hämtar du filen, sparar den på skrivbordet eller hårddisken och kör den körbara filen. Om du vill uppdatera BIOS måste nätadaptern vara ansluten till systemet och batteriet måste ha en laddning på minst 10 procent.
Filnamn: Alienware X51 R2-A03.exe
Filstorlek: 10.46 MB
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5: a256567987d6893dc3367bd87ae455bf
SHA1: c37f12d16187d4356bf796eebcc656fb238eb348
SHA-256: 6cdbffe6d115d23262509a0ca8b2090b93dadbf97bbeca4909e1045f12ba21fc
Korrigeringar och förbättringar
Fixes
- Not Applicable
Enhancements
-Added SATA mode option.
-Enhanced for PCIE performance.
Installationsanvisningar
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Exit Save Changes and reboot system.
5. Press F12, then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing pressing F2 and go to Boot > Boot List Option.
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Exit Save Changes and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.