Dell OptiPlex 5270 AIO System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : 2F01R

Önem : Kritik

Version : 1.1.1, 1.1.1 En son sürüm Önerilen sürüm En son ve Önerilen sürüm

Sürüm Tarihi : 15 Tem 2019

İndirme Türü : Sistem BIOS

Kategori : BIOS

This package contains the Dell System BIOS update. It is supported on Dell OptiPlex 5270 All-in-One system that runs the Windows operating system. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel security advisories INTEL-SA-00213 and INTEL-SA-00233. A security advisory is a statement when a product is impacted by a security vulnerability and a remedy is available.

Dosyaları İndir

Dosya Biçimi: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: OptiPlex_5270_1.1.1.exe

File size: 22.6 MB

İndirme işleminizin bütünlüğünü sağlamak için lütfen sağlama toplamı değerini doğrulayın.

MD5: dd8a7826e70956f1735b162e44556598

SHA1: d22e2ff50a4a6477323ea05646a85395e3fb4329

SHA-256: aff9b38f181bee008d539638cb7be9a2ae60db864803029da338e397f7cc8236

İndir .EXE

Fixes & Enhancements

Fixes:
- Firmware updates to address security advisory INTEL-SA-00213 (CVE-2019-0090, CVE-2019-0086, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094, CVE-2019-0096, CVE-2019-0097, CVE-2019-0098, CVE-2019-0153 and CVE-2019-0170)
- Firmware updates to address security advisories INTEL-SA-00233(CVE-2018-12126, CVE-2018-12127, CVE-2018-12130 and CVE-2019-11091)
- Removed the pre-boot Intel RST Manager Optimized Defaults option.

Enhancements:
- Not Applicable

Kurulum talimatları

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a progress bar at the Dell logo screen. The system restarts again when the update is complete.

Dell OptiPlex 5270 AIO System BIOS

Dosyaları İndir

Fixes & Enhancements

Uyumlu Sistemler

Desteklenen İşletim Sistemleri

Kurulum talimatları

Şunlar için geçerlidir: