Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell OptiPlex 3010 System BIOS
Restart required Takılı Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
This package contains the BIOS update for Dell OptiPlex 3010 that runs Windows and DOS operating systems. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices. This package fixes the issue where the system stops responding when an incorrectly formatted password is entered in the BIOS Security Manager screen.
Önerilen
Uyumluluğu kontrol edin
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girinDell Servis Etiketinizi veya modelinizi girin
Ürününüzü aramak mı istiyorsunuz? Bir ürün tanımlayıcısı girin. Nasıl yapılacağını göster
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın. Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
Fixes
- Fixed a potential issue where the system stops responding when an incorrectly formatted password is entered in the BIOS Security Manager (BIOS preboot password) screen.
Enhancements
- Added BIOS Password Feature: Master Password Lockout.
Read More- Fixed a potential issue where the system stops responding when an incorrectly formatted password is entered in the BIOS Security Manager (BIOS preboot password) screen.
Enhancements
- Added BIOS Password Feature: Master Password Lockout.
Version
A22, A22
Sürüm tarihi
25 Ara 2018
İndirme Türü
Sistem BIOS
Kategori
BIOS
Önem
ÖnerilenDell Technologies, bir sonraki zamanlanmış güncelleme döngünüzde bu güncellemeyi uygulamanızı önerir. Bu güncelleme, genel sistem durumunu korumaya yönelik değişiklikler içerir. Sistem yazılımının güncel ve diğer sistem modülleriyle (bellenim, BIOS, sürücüler ve yazılım) uyumlu kalmasını sağlar ve başka yeni özellikleri içerebilir.
Kullanılabilir biçimler View Important Information
Dosya Biçimi: Windows/DOS için CPG BIOS Yürütülebilir Dosyası
Dosya Adı: O3010A22.exe
Dosya Boyutu: 4.51 MB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
İndirme işleminizin bütünlüğünü sağlamak için lütfen sağlama toplamı değerini doğrulayın.
MD5:
570f55e74d2aa62a73bf9bacbb73767f
SHA1:
c0e98adde1ea22e3ae69f83a24366e264d77f1cc
SHA-256:
1c191d119fc73d99b125a6700978cf2032c06cff8806147e408af432fbedeb78
İndirdiğinizde, Dell Software Lisans Sözleşmesi’nin koşullarını kabul etmiş olursunuz.
Important Information
Upgrading and Downgrading between Currently Released BIOS Images (PreWin8 Released BIOS) and Win8 Feature Enhanced BIOS Images (Win8 Released BIOS)
Upgrading: The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged.
Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings.
After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS.
This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions only and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set).
These prompts cannot be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings.
The following is retained on the machine (all other settings are reset):
Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code. Downgrading is blocked if either Secure Boot is on or if Computrace has been activated.
Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired.
You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 Released BIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.
Upgrading: The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged.
Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings.
After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS.
This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions only and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set).
These prompts cannot be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings.
The following is retained on the machine (all other settings are reset):
Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code. Downgrading is blocked if either Secure Boot is on or if Computrace has been activated.
Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired.
You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 Released BIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.
Şunlar için geçerlidir:
Dell Optiplex 3010
Kurulum talimatları
Note 1: You must provide a bootable DOS USB drive. This executable file does not create the DOS system files.
Note 2: Ensure that you suspend BitLocker encryption before updating BIOS on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Updating the BIOS through Windows
1. Click Download File, to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
Windows System restarts automatically and updates BIOS at the system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with Legacy boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB.
2. Power on the system and then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Save Changes and reboot system.
5. Press F12 and then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After the BIOS update is finished, system will reboot automatically.
7. Go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
8. Change Legacy to UEFI Boot Option.
9. Go to Exit > Save Changes and reboot system.
Note 2: Ensure that you suspend BitLocker encryption before updating BIOS on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Updating the BIOS through Windows
1. Click Download File, to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
Windows System restarts automatically and updates BIOS at the system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with Legacy boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB.
2. Power on the system and then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Save Changes and reboot system.
5. Press F12 and then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After the BIOS update is finished, system will reboot automatically.
7. Go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
8. Change Legacy to UEFI Boot Option.
9. Go to Exit > Save Changes and reboot system.
BIOS sorunlarıyla ilgili yardıma mı ihtiyacınız var?
Dell'in BIOS sorun giderme kılavuzundan bir çözüm bulunSürücülerle ilgili yardım ve öğreticiler
Daha fazla indirme için bkz. Sürücüler ve indirmeler. Bu sayfadaki bilgileri kullanmayla ilgili yardım almak için lütfen Sürücü Yardımı ve Öğretici Videoları bölümünü ziyaret edin.