TakılıBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
iDRAC with Lifecycle Controller 4.30.30.30
Önerilen
Uyumluluğu kontrol edin
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
Sonuç bulunamadı.Aramanız için sonuç bulamadık. Lütfen bir servis etiketi (B959FS3) veya model (Latitude 5540) girerek aramanızı değiştirin ve tekrar deneyin.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
Fixes - Fix for PERC9 - Virtual Disk created with Invalid Slot name from iDRAC UI and Racadm - Fix for "HWC8010 Config error detected on SKU 8*2.5NVMe after upgrade iDRAC" - Fix for Fan Noise issue with PCIe SSD: : Intel P4800 - Fix for HIIPop Core (Buffer overflow fix) when system hard reset is done on Reventon server - Fix in GUI for Auto config changes for HBA Storage configuration. - Fix for MCU FW Revision for RIO Card from 0x0006 to 0x0005 - Fix for thermal cores generated with Maximum GPU configurations for Sesto (R7525) platform.
Enhancements - PERC 11 Management support - Support for NVMe Opal SEDs in addition to TCG-SSC protocol - Support for Gen 3 NVMe drives - HW Chain of Trust Secure Boot - PERC 11 introduced a new MFI_STAT that must be handled by Systems Management - BOSS-S2 (BOSS1.5) - Support for Boot Optimised storage solution 1.5 - SEC-31: BOSS 1.5 secure FW update* - Adding HBA11 to AMD Platforms - "CUPS" for AMD - flex on Demand - InfiniBand Adapter Support for Mellanox CX6 - ALL NVMe solution for Hubble - x2 - NDE on Roadster - Support 24x NVMe Backplane for Roadster - Increase iDRAC memory size from 512MB to 1024MB* - New Matrox video driver for 14G/15G platforms - Add Starlord (ConnectX-6 Dx 100GbE) to iDRAC - Change PE15 100GbE PAM4 adapter requirements from QSFP56 to SFP56-DD* - enable open loop backup support for integrated devices - RESTUI changes for Email Sending failed when authentication is disabled. - FQDD related changes for BOSS-S2/PERC11/HBA11 for Slimline - Support storage devices (like M.2 and U.2 but not limited) without a backplane
Dell Technologies, bir sonraki zamanlanmış güncelleme döngünüzde bu güncellemeyi uygulamanızı önerir. Bu güncelleme, genel sistem durumunu korumaya yönelik değişiklikler içerir. Sistem yazılımının güncel ve diğer sistem modülleriyle (bellenim, BIOS, sürücüler ve yazılım) uyumlu kalmasını sağlar ve başka yeni özellikleri içerebilir.
Dosya Biçimi:An archive of PDF files to provide help and procedural information to the customers
Dosya Adı:iDRAC_4.30.30.30_ReleaseNotes_A00.pdf
Dosya Boyutu:116.52 KB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Download 1. Click Download Now to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive. Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update