Завантажити файли
Формат файлу: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
Ім’я файлу: E6410A09.EXE
Розмір файлу: 5.19 MB
Щоб забезпечити цілісність завантаження, перевірте значення контрольної суми.
MD5: ffcce251e352d8e03650217c60caee85
SHA1: ed772fc896310c4a48c750bb3060e8267fc36120
Виправлення та покращення
1. Fix the failure of the operation system installation with 4GB or above system memory in UEFI mode.
2. Fix the system failed to restore operation system from hibernation state in UEFI mode.
3. Improve the FDE hard drive support.
4. BIOS flash update enhancement.
5. Updated the PXE option ROM to version 1.3.72.
6. Updated the manageability engine firmware to version 6.2.0.1022.
Важлива інформація
Notes:
--------
Please note that if the A01 BIOS is currently installed on your system you must
first apply the P02 patch (E6410P02.EXE) before upgrading to this BIOS.
Підтримувані операційні системи
Інструкції зі встановлення
BIOS Update Executable for Windows/DOS
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.