LSI Logic Ultra320 SCSI Controller, v.1.08.15, A00

Default Instructions for R51294.exe:

Installing the LSI Logic Driver during a fresh Windows XP Installation
-------------------------------------------------------------------------

1. Ensure your Windows XP CD is inserted into the CD-ROM drive.

2. Start your system. Immediately press and release the F6 key when you
see the following message:

"Setup is inspecting your computer's hardware configuration..."
If you do not see this message, your system may not be setup to boot from
CD-ROM. This change can be made within System Setup by rebooting and
pressing F2.

3. When prompted, press S to specify an additional device.

4. Press Enter to select Others; insert the LSI Logic Ultra320 SCSI
Driver for Windows XP diskette in your floppy drive.

5. Use the arrow keys to highlight "LSI Logic Ultra320 SCSI Adapter",
then press Enter.

6. To add other host adapters that are not part of the Ultra320 Family,
press S and repeat from Step 4 for each additional adapter and insert the
appropriate driver disk.

7. Press Enter to continue with the Windows XP operating system setup.
Follow the instructions onscreen and in the Windows XP documentation to
complete the installation.



Updating the LSI Logic Driver from within Windows XP
-------------------------------------------------------------------------


1. From Device Manager right click on the "LSI Logic Ultra320 SCSI
Adapter" and then choose 'Properties'.

2. Click on the 'Driver' tab, click 'Update Driver' and then click on
the 'Next' button.

3. From the next screen click on 'Display a list of the known drivers for
this device...' and then the 'Next' button.

4. Click the 'Have Disk' button and type "a:\" in the 'Copy
Manufacturer's files from:' drop down menu and choose 'OK'.

5. Choose the "LSI Logic Ultra320 SCSI Adapter" from the list and
choose 'Next'. From the next screen choose 'Next' again.

6. Choose 'Finish' to complete the installation and restart system.