下载文件
文件格式： 此文件格式包含BIOS可执行文件。可以使用通用格式(Windows/MS DOS)，从任何Windows或MS DOS环境安装。
文件名: XPS8910_1.0.10.exe
文件大小: 4.26 MB
为确保下载的完整性，请验证校验和值。
MD5： a2566728130407bba8e39626ea994a34
SHA1： 82943bbeda8606c7fa82d0576b816092654c2487
SHA-256： 027fe0ef51d7a5725bac97c82d644bbe3195325d91175252578339656b9758f5
补丁和增强功能
Fixes:
Not Applicable.
Enhancements:
- Enhanced the Dell diagnostic fan testing.
重要信息
Warning:
1. If system has Overlocking Enable, please disable Overclocking prior to update the BIOS. Go to BIOS setup to disable Overclocking.
2. Do not press "CTRL+ALT+DEL to sign out", or "unplug power cord", or "enter S4/reboot...etc" during upgrading BIOS process.
安装说明
BIOS Update Executable for Windows/DOS
Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply", "Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot .
8. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
9. Change "Legacy" to "UEFI" Boot Option.
10. Click "Apply", "Exit" to save changes and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.