下载文件
文件格式： Red Hat Linux更新包的GnuPG签名可用于验证戴尔在相关Red Hat Linux更新包中的身份。
文件名: SAS-RAID_Firmware_556GW_LN32_20.10.1-0084_A04.BIN.sign
文件大小: 194 Bytes
为确保下载的完整性，请验证校验和值。
MD5： 2e1c66d6e465f0d5aee0084799053dd1
SHA1： a4741657a79575d83a5f5d0a1351d4968e0861b2
文件格式： 适用于Linux 的戴 尔更新包是在 满足特定的标准系统环境下使用的独立应用程序。，然后应用更新。
注意：Linux的更新包是开源的。查看适用于Linux 的戴 尔更新包自述以了解 详情，了解详情。
文件名: SAS-RAID_Firmware_556GW_LN32_20.10.1-0084_A04.BIN
文件大小: 5.66 MB
为确保下载的完整性，请验证校验和值。
MD5： 8588722f5596bedf480b21253185b0eb
SHA1： 7c2dfbc12bfcfaf31177db12ddf63deb71d038ab
文件格式： Microsoft Windows 32位格式中的戴尔更新包(DUP)设计为可以在Microsoft Windows 64位操作系统上运行。Microsoft Windows 64位格式中的戴尔更新包(DUP)仅可在Microsoft Windows 64位操作系统上运行。选择设备驱动程序更新时，请务必选择适合您的操作系统的更新。
文件名: SAS-RAID_Firmware_556GW_WN32_20.10.1-0084_A04.EXE
文件大小: 7.57 MB
为确保下载的完整性，请验证校验和值。
MD5： 84d5946d1064a985bc2e54396c91c3ec
SHA1： 01ab58b36e4954eb51074cf174054f791ba6859d
文件格式： 此文件格式包含纯文本，您可以采用标准文本编辑器进行查看。
文件名: SAS_RAID_Firmware_H310_MiniBlade_RELNOTES_20.10.1-0084_A04.txt
文件大小: 3.4 KB
为确保下载的完整性，请验证校验和值。
MD5： e96e43b365127a4f320d2f14c74112b4
SHA1： 132eb36d18c22512570cfe64bca320a2792bf5d4
文件格式： 此文件包含一组压缩文件。将文件下载到硬盘上的文件夹中，然后运行（双击）它来解压这组文件。请按照说明完成安装。
文件名: SAS_RAID_H310MB_20.10.1-0084_A04_ZPE.exe
文件大小: 2.63 MB
为确保下载的完整性，请验证校验和值。
MD5： f22edebcf1fa231f7b8620d639e54658
SHA1： e5bb69fa2d18a7601f437dfd55d015c739c0f902
SHA-256： 51814da53381b1dd7e0fefe13879a16b87187a26e72994bb3b29f1ad6f014330
重要信息
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade.
* Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.
To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"
To start the Server Administrator service,
run "omconfig system webserver action=start"
To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"
To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"
安装说明
Performing the Firmware Upgrade
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.