下载文件
文件格式： 此文件格式包含BIOS可执行文件。可以使用通用格式(Windows/MS DOS)，从任何Windows或MS DOS环境安装。
文件名: Inspiron_5565_5765_1.0.6.exe
文件大小: 19.23 MB
为确保下载的完整性，请验证校验和值。
MD5： 76ea98ac322a8013a066a8264916ebc8
SHA1： 0b8f92fd242272b0ead70e32b48469e87542264c
SHA-256： fa135b3df2efc052cc88fb1546730f4a32302d709a950dca13e8d9e4cc2458e2
补丁和增强功能
Fix:
-DSC system plug 45W PwC will show warning message at POST phase
-ePSA Configuration tab show incorrect WLAN/BT installed status when remove WLAN/BT card
-Enable MFG mode can't auto continue booting when meet Excalibur warning response
Enhancements:
-Update AMD Agesa 1.3.0.6
-Update "Gamora_Thermal Formal control table for AMD_Bristol_v08.xlsx"
安装说明
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system