LSI Logic Ultra 320 SCSI Adapter Non-RAID, v.2.02.02, A02
已安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
RedHat AS2.1 Driver Update Disk
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。 您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Fixes
=====
-This release adds an installation script file to correct driver module placement. This release
also contains edited/updated instructions to reflect the use of the new installation script.
Enhancements
============
-This driver disk has been released as a unix tar file as opposed to previous posts which were
releases. This was done to alleviate the need for a Microsoft Windows machine.
了解详情=====
-This release adds an installation script file to correct driver module placement. This release
also contains edited/updated instructions to reflect the use of the new installation script.
Enhancements
============
-This driver disk has been released as a unix tar file as opposed to previous posts which were
releases. This was done to alleviate the need for a Microsoft Windows machine.
版本
2.02.02, A02
发布日期
09 4月 2003
下载类型
驱动程序
类别
SCSI非RAID
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改，或者提供不一定不适用于您的环境的新功能。
重要信息
Please ensure that the post install script is run after installation. Please see the readme file for further information.
受支持的操作系统
Red Hat® Enterprise Linux 2.1
适用于
Ultra 320 SCSI Adapter Non-RAID
安装说明
Custom Instructions for mptlinux-2.02.02-i686.tar.gz:
Creating the driver disk
------------------------
You will need a formatted 3 1/2 inch floppy diskette for the
following procedure.
Extract the files in the archive to the floppy disk as follows:
- Under Linux
mount /dev/fd0 /mnt/floppy
tar xvzf /mnt/floppy
(Eg: /root/linux-driver.tar.gz)
umount /mnt/floppy
- Under Windows
You can use Winzip to extract tar.gz archives. However,
note the following settings under Winzip to ensure correct
extraction of the files.
Go to Options -> Configuration
Under the Miscellaneous tab make sure "TAR file smart
CR/LF conversion" is unchecked.
On opening the tar.gz archive with Winzip, we get the
following prompt:
'Archive contains one file. Should Winzip decompress it to
a temporary folder and open it?'
Press 'yes' and extract the file normally under Winzip to
the floppy drive.
Installing the LSI Logic PCI SCSI controller as the boot device
---------------------------------------------------------------
1. Install the controller and connect to the hard drives as
explained in the hardware installation guide.
2. Make sure the LSI Logic controller shows up before all
other SCSI devices but after the floppy drive and CD-Rom
in the system BIOS boot order.
3. Boot normally from the Redhat installation CD-Rom.
4. Type 'linux dd' on the boot prompt.
5. When the install prompts for a driver disk, insert the
driver disk created above and press 'Enter'.
6. Complete the installation as directed by the install.
7. After completing the installation, remove the floppy
from the drive and reboot the machine.
8. When RedHat boots for the first time, login as root.
9. Insert the floppy into the drive and execute the
following commands at a command line:
mkdir -p /mnt/floppy
mount -t vfat /dev/fd0 /mnt/floppy
cd /mnt/floppy
./post_install.scr
cd
umount /dev/fd0
NOTE: This script file will copy the necessary modules to
the proper directories. Failure to execute this script will
cause error messages when executing "mkinitrd". Mkinitrd
is typically executed when updating drivers on the server.
Installing the LSI Logic PCI SCSI controller as a secondary storage
device
--------------------------------------------------------------------------
1. Install the controller and connect to the hard drives as
explained in the hardware installation guide.
2. Make sure the controller you want as the boot device
shows up before all other SCSI devices but after the
floppy drive and CD-Rom in the system BIOS boot order.
3. Boot normally from the Redhat installation CD-Rom.
4. Type 'linux dd noprobe' on the boot prompt.
5. When the install prompts for a driver disk, insert the
driver disk created above and press 'Enter'.
6. The install doesn't autodetect any SCSI controllers. You
will need to manually select the device drivers from the
SCSI list. Make sure you select the driver for the boot
controller of your choice first.
7. To install the drivers for the LSI Logic PCI SCSI
controller first select "Fusion MPT base driver" and then
the "Fusion MPT scsi host driver" from the SCSI list.
8. Complete the installation as directed by the install.
9. After completing the installation, remove the floppy
from the drive and reboot the machine.
10. When RedHat boots for the first time, login as root.
11. Insert the floppy into the drive and execute the
following commands at a command line:
mkdir -p /mnt/floppy
mount -t vfat /dev/fd0 /mnt/floppy
cd /mnt/floppy
./post_install.scr
cd
umount /dev/fd0
Creating the driver disk
------------------------
You will need a formatted 3 1/2 inch floppy diskette for the
following procedure.
Extract the files in the archive to the floppy disk as follows:
- Under Linux
mount /dev/fd0 /mnt/floppy
tar xvzf
(Eg: /root/linux-driver.tar.gz)
umount /mnt/floppy
- Under Windows
You can use Winzip to extract tar.gz archives. However,
note the following settings under Winzip to ensure correct
extraction of the files.
Go to Options -> Configuration
Under the Miscellaneous tab make sure "TAR file smart
CR/LF conversion" is unchecked.
On opening the tar.gz archive with Winzip, we get the
following prompt:
'Archive contains one file. Should Winzip decompress it to
a temporary folder and open it?'
Press 'yes' and extract the file normally under Winzip to
the floppy drive.
Installing the LSI Logic PCI SCSI controller as the boot device
---------------------------------------------------------------
1. Install the controller and connect to the hard drives as
explained in the hardware installation guide.
2. Make sure the LSI Logic controller shows up before all
other SCSI devices but after the floppy drive and CD-Rom
in the system BIOS boot order.
3. Boot normally from the Redhat installation CD-Rom.
4. Type 'linux dd' on the boot prompt.
5. When the install prompts for a driver disk, insert the
driver disk created above and press 'Enter'.
6. Complete the installation as directed by the install.
7. After completing the installation, remove the floppy
from the drive and reboot the machine.
8. When RedHat boots for the first time, login as root.
9. Insert the floppy into the drive and execute the
following commands at a command line:
mkdir -p /mnt/floppy
mount -t vfat /dev/fd0 /mnt/floppy
cd /mnt/floppy
./post_install.scr
cd
umount /dev/fd0
NOTE: This script file will copy the necessary modules to
the proper directories. Failure to execute this script will
cause error messages when executing "mkinitrd". Mkinitrd
is typically executed when updating drivers on the server.
Installing the LSI Logic PCI SCSI controller as a secondary storage
device
--------------------------------------------------------------------------
1. Install the controller and connect to the hard drives as
explained in the hardware installation guide.
2. Make sure the controller you want as the boot device
shows up before all other SCSI devices but after the
floppy drive and CD-Rom in the system BIOS boot order.
3. Boot normally from the Redhat installation CD-Rom.
4. Type 'linux dd noprobe' on the boot prompt.
5. When the install prompts for a driver disk, insert the
driver disk created above and press 'Enter'.
6. The install doesn't autodetect any SCSI controllers. You
will need to manually select the device drivers from the
SCSI list. Make sure you select the driver for the boot
controller of your choice first.
7. To install the drivers for the LSI Logic PCI SCSI
controller first select "Fusion MPT base driver" and then
the "Fusion MPT scsi host driver" from the SCSI list.
8. Complete the installation as directed by the install.
9. After completing the installation, remove the floppy
from the drive and reboot the machine.
10. When RedHat boots for the first time, login as root.
11. Insert the floppy into the drive and execute the
following commands at a command line:
mkdir -p /mnt/floppy
mount -t vfat /dev/fd0 /mnt/floppy
cd /mnt/floppy
./post_install.scr
cd
umount /dev/fd0