DELL,PWA,DTRBD,SAS,6G,B2,C6105,2,0,0,49,2,0,0,49

This procedure installs the LSI_SAS2.SYS driver onto a new or existing Windows
Server 2008 system. Depending upon the media used to distribute LSI drivers
(web or CD-ROM) and the type of adapter, you will create a driver install
package on some type of accessible media. This can be a diskette, CD or DVD,
or USB flash drive. The driver install package can also be placed on a hard
disk for driver upgrades only.

Copy the files listed in this section to a folder on the desired media as
shown below. You will use this driver package during the installation process.

lsi_sas2.inf
lsi_sas2.sys
lsinodrv.inf
svlhx86.cat (for x86) or
svlhia64.cat (for IA64) or
svlhx64.cat (for x64)

Note: Windows Server 2008 drivers must be either Release signed (by LSI) or
WHQL logo signed (by Microsoft Windows Hardware Quality Labs) to be
installed on Server 2008. Any modifications to any of the above files
will invalidate the digital signature of the package and Server 2008 will
not install the driver.