Dell PowerEdge M910 CPLD, v.Pri: 1.0.2, Sec: 1.0.0, A02

Fixes:
A problem was found where an I/O pin on our M910 blade was configured incorrectly, causing failed communication between the blade and the CMC. This failure is load dependent (the more blades, the more likely you will see a failure). Any M1000e chassis with a M910 is susceptible to the failure as the chassis loading approaches 10 blades. The fix is a M910 CPLD update. The update is restricted to changing the one pin that was programmed incorrectly. There are no other impacts or risks to the system operation.