SK hynix固态硬盘固件更新
需要重新启动 已安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
This package provides the firmware for SK hynix PC200 family of Solid State Drives, Revision 20003B00, and is supported on XPS models running the following Windows operating systems: Windows 7, Windows 8, Windows 8.1, Windows 10
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。 您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Fixes the Windows 10 upgrade install timeout
了解详情版本
20003B00, A01
发布日期
16 10月 2015
下载类型
固件
类别
存储设备
重要性
推荐Dell Technologies 建议在下一个计划的更新周期期间应用此更新。更新包含用于维护整体系统运行状况的更改。它可确保系统软件保持最新状态并与其他系统模块（固件、BIOS、驱动程序和软件）兼容，并且可能包括其他新功能。
可用格式 查看重要信息
文件格式： 外置ZipPack
文件名： PC200_20003B00_ZPE.exe
文件大小： 1.61 MB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
此文件包含一组压缩文件。将文件下载到硬盘上的文件夹中，然后运行（双击）它来解压这组文件。请按照说明完成安装。
为确保下载的完整性，请验证校验和值。
MD5：
025153c7142eba7ad4fa61d9bf3fab3e
SHA1：
e266b1ce2808f7c687182cebac6df306ebea93c7
SHA-256：
96779c2ff55e60d86a16a9882444c5c09f3685789f162cb34146053810b516e5
开始下载软件，即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
重要信息
1. Please backup data in the SSD, or at least make copies of all important files stored in the SSD before executing this firmware update.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
受支持的操作系统
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
适用于
TBD
安装说明
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
ATTENTION
1. Backup the SSD.
2. Switch to AC Power
Firmware upgrade through the Windows utility
Procedure
1. Go to the directory containing the download package as noted above.
2. Run the firmware update utility with administrator privilege (right-click on the executable, then select "Run as administrator").
3. Follow the on-screen instructions.
4. Select the target SSD for firmware upgrade.
5. Click on "FW Update" button.
6. Follow the on-screen instructions.
7. DO NOT interrupt the firmware update. A dialog box will pop up when the firmware update is completed.
8. Please reboot your system.
------------------------------------------------------------------------------------------
Firmware upgrade using the bootable image
1. An ISO image is provided in the download package. Use that image to create a bootable USB thumb drive. You may want to consider using UNetBootin
2. Boot the system from the USB thumb drive created in Step 1.
3.Your PC will boot up with Linux booting screen and it displays SSDs that connected to your PC.
4. The FW update tool will seek SK hynix PC200 SSD. If the tool find a SK hynix PC200, it will start to update automatically, if not it displays an error message.
5. After successful FW update, PC will shutdown after about 10 sec.
1. Prepare a USB thumb drive
(1) USB storage and ISO image Writer(like UNetBootin) are needed for updating SSD FW with this package.
(2) Run unetbootin-windows-608.exe
(3) Check 'DiskImage' button and select path to ISO file using the ' ... ' option button.
(4) If USB Drive is ready, then UNetbooin will show the driver letter.
(5) Select OK to copy ISO bootable image to USB thumb drive
(6) Once installation is completed, please follow the next steps on UNetbootin Window.
*.Installation Instructions
: For the detail usage of this package, Please refer to the attached Update Tool Manual.
Reboot will be required
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
ATTENTION
1. Backup the SSD.
2. Switch to AC Power
Firmware upgrade through the Windows utility
Procedure
1. Go to the directory containing the download package as noted above.
2. Run the firmware update utility with administrator privilege (right-click on the executable, then select "Run as administrator").
3. Follow the on-screen instructions.
4. Select the target SSD for firmware upgrade.
5. Click on "FW Update" button.
6. Follow the on-screen instructions.
7. DO NOT interrupt the firmware update. A dialog box will pop up when the firmware update is completed.
8. Please reboot your system.
------------------------------------------------------------------------------------------
Firmware upgrade using the bootable image
1. An ISO image is provided in the download package. Use that image to create a bootable USB thumb drive. You may want to consider using UNetBootin
2. Boot the system from the USB thumb drive created in Step 1.
3.Your PC will boot up with Linux booting screen and it displays SSDs that connected to your PC.
4. The FW update tool will seek SK hynix PC200 SSD. If the tool find a SK hynix PC200, it will start to update automatically, if not it displays an error message.
5. After successful FW update, PC will shutdown after about 10 sec.
1. Prepare a USB thumb drive
(1) USB storage and ISO image Writer(like UNetBootin) are needed for updating SSD FW with this package.
(2) Run unetbootin-windows-608.exe
(3) Check 'DiskImage' button and select path to ISO file using the ' ... ' option button.
(4) If USB Drive is ready, then UNetbooin will show the driver letter.
(5) Select OK to copy ISO bootable image to USB thumb drive
(6) Once installation is completed, please follow the next steps on UNetbootin Window.
*.Installation Instructions
: For the detail usage of this package, Please refer to the attached Update Tool Manual.
Reboot will be required