LSI Logic Ultra 320 SCSI适配器非RAID, v.1.02.00.00, A01
已安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
LSI Logic Ultra U320 HBA and embedded 1020/1030 PCI SCSI Netware 6.0 driver
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。 您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Functionality
-------------
- None
Defect fixes
------------
- There was an additional codepath where PPR was being done
to non-PPR devices. Now PPR is not being done to devices
that do not have support for this.
- The driver was incorrectly reporting the number of
supported devices (off by 1) which was affecting ASPI
being able to communicate with devices at ID 15.
- There were some tape devices that were not correctly
handling an INQUIRY to LUN 8. Now the driver only does
query up to LUN 7 for non-Direct SCSI devices.
了解详情-------------
- None
Defect fixes
------------
- There was an additional codepath where PPR was being done
to non-PPR devices. Now PPR is not being done to devices
that do not have support for this.
- The driver was incorrectly reporting the number of
supported devices (off by 1) which was affecting ASPI
being able to communicate with devices at ID 15.
- There were some tape devices that were not correctly
handling an INQUIRY to LUN 8. Now the driver only does
query up to LUN 7 for non-Direct SCSI devices.
版本
1.02.00.00, A01
发布日期
14 8月 2002
下载类型
驱动程序
类别
SCSI非RAID
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改，或者提供不一定不适用于您的环境的新功能。
重要信息
Important Notes
---------------
- Support Pack 2 is required for Netware 6.0.
- When used in conjunction with any PERC card acting as the
boot controller, do NOT install the NWPA on the driver disk,
this will cause a hang at boot. If this happens, run the
"recover.bat" program in the sp1_nwpa subdirectory
on the driver disk. Then, upgrade to Support Pack 2.
- Netware 6.0 installation on a multiprocessor platform will
fail due to absence of the latest Support Pack files. To
successfully install Netware 6.0 on such a platform, you
will need to boot into the driver disk created above
after completing the server installation. Refer to the
install instruction notes provided.
- Installation of Netware 6.0 on a uniprocessor system
will be successful. The support packs, however,
are required updates for stable functionality of the
driver.
- Both instances of the driver must be loaded for
dual-channel controllers instead of a single instance.
- This version of the driver will work with Integrated
Mirroring (IM) MPT firmware. However, IM volumes are not
supported therefore no IM volumes should be configured.
The driver will not load for a channel with an IM volume.
- Cabling and/or test conditions that result in numerous
SCSI Bus resets may cause the OS to deactivate devices.
Device rescan and volume remount may be required.
---------------
- Support Pack 2 is required for Netware 6.0.
- When used in conjunction with any PERC card acting as the
boot controller, do NOT install the NWPA on the driver disk,
this will cause a hang at boot. If this happens, run the
"recover.bat" program in the sp1_nwpa subdirectory
on the driver disk. Then, upgrade to Support Pack 2.
- Netware 6.0 installation on a multiprocessor platform will
fail due to absence of the latest Support Pack files. To
successfully install Netware 6.0 on such a platform, you
will need to boot into the driver disk created above
after completing the server installation. Refer to the
install instruction notes provided.
- Installation of Netware 6.0 on a uniprocessor system
will be successful. The support packs, however,
are required updates for stable functionality of the
driver.
- Both instances of the driver must be loaded for
dual-channel controllers instead of a single instance.
- This version of the driver will work with Integrated
Mirroring (IM) MPT firmware. However, IM volumes are not
supported therefore no IM volumes should be configured.
The driver will not load for a channel with an IM volume.
- Cabling and/or test conditions that result in numerous
SCSI Bus resets may cause the OS to deactivate devices.
Device rescan and volume remount may be required.
受支持的操作系统
Novell Netware
适用于
Ultra 320 SCSI Adapter Non-RAID
安装说明
NOTE: In order to create this diskette, this file must be downloaded to
and executed on a system running Microsoft Windows.
Default Instructions for lsi-nw102a01.exe:
This program creates a Netware 6.0 driver diskette
for the LSI Logic SCSI controllers. You will need a
formatted 3 1/2 inch floppy diskette for the following
procedure.
1) Download the file to a directory on your hard drive. The
file downloaded is a self extracting executable.
2) Double click on the file to run the executable.
3) Click on the setup button.
4) Follow the on screen instructions to create the driver
diskette.
Performing a new installation of Netware
----------------------------------------
1. Boot to the Novell Netware Installation CD.
2. For Netware 6.0:
Follow the instructions on the screen until you get to
the type of installation selection.
3. Select Custom Install.
4. Follow the instructions on the screen until you reach the
"Storage Driver Support" screen. This screen is used to
add, change or delete drivers.
5. Select "Storage Adapters" on the "Storage Driver Support"
screen.
6. Press "Insert" to add unlisted drivers. Press "Insert"
again. A path displays.
7. Insert the driver diskette created above into the floppy
drive and press "Enter".
8. The system finds the LSIMPTNW.HAM driver for the LSI
Logic Ultra320 SCSI adapters.
9. Return to the Driver Summary screen. Continue the
installation.
NOTE: After installing Netware 6.0 on a multiprocessor
system, it will hang on bootup. This is due to the
absence of the latest Support Pack files. To bring the
system up, boot from the driver disk. This will copy
the essential files and boot the server. Once the
server is up and running, it is recommended to load
the latest support pack to ensure a stable
configuration.
10. Boot from the driver disk to copy the essential files.
11. Install Support Pack 2 or later for Netware 6.0.
Adding the LSI Logic SCSI Driver to an Existing Netware Server
--------------------------------------------------------------
NOTE: The LSI Logic SCSI Driver requires the latest support
pack to be installed on a Netware 6.0 system. If the
support pack files are missing, the server will hang
on bootup.
1. Install Support Pack 2 or later for Netware 6.0.
2. At the server console prompt, type "NWCONFIG" and press
"Enter".The "Configuration Options" screen is displayed.
3. Select "Driver Options" and press "Enter".
4. Select "Configure Disk and Storage Device Options" and
press "Enter".
5. Select "Select an additional driver".
6. The "Select a Driver" screen displays. Press "Insert".
7. Press "F3" to select a new path.
8. Type "A:". Insert the driver diskette created above into
the floppy drive and press "Enter".
9. The system will display the LSIMPTNW.HAM driver found on
the diskette.
10. Select the driver and press "Enter".
and executed on a system running Microsoft Windows.
Default Instructions for lsi-nw102a01.exe:
This program creates a Netware 6.0 driver diskette
for the LSI Logic SCSI controllers. You will need a
formatted 3 1/2 inch floppy diskette for the following
procedure.
1) Download the file to a directory on your hard drive. The
file downloaded is a self extracting executable.
2) Double click on the file to run the executable.
3) Click on the setup button.
4) Follow the on screen instructions to create the driver
diskette.
Performing a new installation of Netware
----------------------------------------
1. Boot to the Novell Netware Installation CD.
2. For Netware 6.0:
Follow the instructions on the screen until you get to
the type of installation selection.
3. Select Custom Install.
4. Follow the instructions on the screen until you reach the
"Storage Driver Support" screen. This screen is used to
add, change or delete drivers.
5. Select "Storage Adapters" on the "Storage Driver Support"
screen.
6. Press "Insert" to add unlisted drivers. Press "Insert"
again. A path displays.
7. Insert the driver diskette created above into the floppy
drive and press "Enter".
8. The system finds the LSIMPTNW.HAM driver for the LSI
Logic Ultra320 SCSI adapters.
9. Return to the Driver Summary screen. Continue the
installation.
NOTE: After installing Netware 6.0 on a multiprocessor
system, it will hang on bootup. This is due to the
absence of the latest Support Pack files. To bring the
system up, boot from the driver disk. This will copy
the essential files and boot the server. Once the
server is up and running, it is recommended to load
the latest support pack to ensure a stable
configuration.
10. Boot from the driver disk to copy the essential files.
11. Install Support Pack 2 or later for Netware 6.0.
Adding the LSI Logic SCSI Driver to an Existing Netware Server
--------------------------------------------------------------
NOTE: The LSI Logic SCSI Driver requires the latest support
pack to be installed on a Netware 6.0 system. If the
support pack files are missing, the server will hang
on bootup.
1. Install Support Pack 2 or later for Netware 6.0.
2. At the server console prompt, type "NWCONFIG" and press
"Enter".The "Configuration Options" screen is displayed.
3. Select "Driver Options" and press "Enter".
4. Select "Configure Disk and Storage Device Options" and
press "Enter".
5. Select "Select an additional driver".
6. The "Select a Driver" screen displays. Press "Insert".
7. Press "F3" to select a new path.
8. Type "A:". Insert the driver diskette created above into
the floppy drive and press "Enter".
9. The system will display the LSIMPTNW.HAM driver found on
the diskette.
10. Select the driver and press "Enter".