下載檔案
檔案格式： Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
檔案名稱: RAID_FRMW_WIN_R269683.EXE
檔案大小: 6.47 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 3C529F93EF43176C292E257138E1008D
檔案格式： 您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
檔案名稱: RAID_FRMW_LX_R269683.BIN.sign
檔案大小: 194 Bytes
為了確保下載的完整性，請驗證總和檢查值。
MD5： BEFE8AC6B79A59305A3F2A7988B26CA9
檔案格式： 此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
檔案名稱: DELL_PERC-H800-ADAPTER_A02_R269683.exe
檔案大小: 2.36 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： bba196cdaa09090229c953db81474a44
SHA1： 20115693708909db224efc712e24b20166f086a2
檔案格式： 此檔案格式內含純文字，可使用標準文字編輯器予以檢視。
檔案名稱: DELL_PERC-H800_ADAPTER_A02_R269683.txt
檔案大小: 9.6 KB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 5c832dddfcd15a803f5905791a433c78
檔案格式： 適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
檔案名稱: RAID_FRMW_LX_R269683.BIN
檔案大小: 4.96 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 931B800073FE1A839B8F79EF2103677F
修復及強化
Fixes:
- Improved disk medium error correction for cases where large numbers of errors are found.
Enhancements:
- Increased performance of random workloads on solid-state drives.
- Increased performance of small sequential workloads.
- Unconfigured and hot spare disks can be spun down to conserve power.
- A virtual disk's capacity can be expanded if there is free space available on its physical disks.
- The controller can be configured to use existing system backplane or storage enclosure disk slots that have hot spares configured as persistent hot spare slots. A hot spare disk can then be removed and replaced with replacement disks without having to configure the new disk as a hot spare. Any disk inserted on that hot slot will be overwritten and become a hot spare.
- Enhanced controller error recovery.
- Non-Dell certified hard drives will no longer be blocked.
重要資訊
Important Information for Update Packages for Microsoft Windows
- Do not run other applications while executing Dell Update Packages.
- Do not run storage controller update packages if the controller is in use by other applications.
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade.
Important Information for Update Packages for Linux
- Do not run other applications while executing Dell Update Packages.
- if the following error occurs, "Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory", you must install the compatibility libraries from "www.redhat.com" or from the Red Hat CD. To install the compatibility libraries, use the following command: "RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"
- When Update Packages stop abruptly due to a power outage or abnormal termination, perform the following steps:
- Remove the lock file.
Type the following command: rm -f /var/lock/.spsetup
- Run the Update Package again to reapply the update.
- Do not run storage controller update packages if the controller is in use by other applications.
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade.
- Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages.
To stop the Dell OpenManage(TM) Server Administrator service,
run "omconfig system webserver action=stop"
To start the Server Administrator service,
run "omconfig system webserver action=start"
To stop the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng stop"
To start the Server Administrator Storage Management Service,
run "/etc/init.d/dataeng start"
安裝指示
Performing the Firmware Upgrade
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_
適用於
ASSY,CRD,CTL,PERCH800,512M,NVD
ASSY,CRD,CTL,PERCH800-512M,SAS
PERC H800 Adapter