下載檔案
檔案格式： 此檔案格式包含 BIOS 可執行檔。此通用 (Windows/MS DOS) 格式可用於在任何 Windows 或 MS DOS 環境中進行安裝。
檔案名稱: 7537A02.exe
檔案大小: 11.18 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 2d7b74a135714a3d3a5e1c290f224fc2
SHA1： d9d5ca70c3fd369d381e9dab2e6a168cff8d4edc
SHA-256： 2e73eeeaa96c70fe64d7060ed036588ded8155cdc7bdde4c4b090443123d63af
修復及強化
Fixes
- Fixed problem of on-board-LAN device may be disappeared occasionally.
Enhancements
- Added DEVSLP enhanced power management support for Samsung SSDs.
安裝指示
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears,click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment,if Legacy Boot mode
1.Copy the downloaded file to a bootable DOS USB key.
2.Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3.Run the file by typing copied file name where the executable is located.
4.DOS System will auto restart and update BIOS while system startup screen.
5.After BIOS update finished,system will auto reboot to take effect.
Run the BIOS update utility from DOS environment,if UEFI Boot mode with Load Legacy Option disabled
1.Copy the downloaded file to a bootable DOS USB key.
2.Power on the system, then go to BIOS Setup by pressing F2 and go to Boot_Boot List Option.
3.Change UEFI to Legacy of Boot List Option.
4.Go to Exit_Exit Save Changes and reboot system.
5.Press F12,then Select USB Storage Device and Boot to DOS prompt.
6.Run the file by typing copied file name where the executable is located.
7.DOS System will auto restart and update BIOS while system startup screen.
8.After BIOS update finished,system will auto reboot.
9.Go to BIOS Setup by pressing pressing F2 and go to Boot_Boot List Option.
10.Change Legacy to UEFI Boot Option.
11.Go to Exit_Exit Save Changes and reboot system
--------------------------------------------------------------------------------
Note 1:You will need to provide a bootable DOS USB key.This executable file does not create the DOS system files.
Note 2:Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.