Emulex Fibre Channel Adapter Software Application for Linux.
驅動程式 ID : 2G3GW
重要性 : 選用
繁體中文版 : 10.2.8, A00-00 最新版本 建議版本 最新與建議版本
發佈日期 : 25 9月 2020
下載類型 : 應用程式
類別 : 光纖通道
Software Application package for RHEL & SLES Linux Operating Systems Emulex Fibre Channel Adapters
下載檔案
檔案名稱: Application.tar.gz
檔案大小: 220.39 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 7bc7dfe76633a885751bf2a3e460c7b6
SHA1： 01ec8c9fb24f37d768f16be9cdbc53729f824a84
SHA-256： 6e295b88d315f845489a7d68b3046fad15f8460cd3fe3e72cfad4ed49a94d91d
修復及強化
Fixes:
- After Dynamic D_Port is transitioned from enabled to disabled, the Emulex HBA Manager application D_Port diagnostics no longer fail.
Enhancements:
- This release adds support for the Emulex HBA Manager application shared CLI.
- This release adds loop topology support on LPe31000-series and LPe32000-series adapters.
- The Emulex HBA Manager application GUI supports firmware log collection.
- This release discontinues support for SLES 12 SP3.
- This release discontinues support for the Emulex HBA Manager application SetPassword CLI command.
- After Dynamic D_Port is transitioned from enabled to disabled, the Emulex HBA Manager application D_Port diagnostics no longer fail.
Enhancements:
- This release adds support for the Emulex HBA Manager application shared CLI.
- This release adds loop topology support on LPe31000-series and LPe32000-series adapters.
- The Emulex HBA Manager application GUI supports firmware log collection.
- This release discontinues support for SLES 12 SP3.
- This release discontinues support for the Emulex HBA Manager application SetPassword CLI command.
相容的系統
支援的作業系統
Red Hat® Enterprise Linux 7
Red Hat® Enterprise Linux 8
SuSE Linux ES 15
安裝指示
Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Install
1. Untar and unzip the file to a local hard drive or other storage media using tar -xzvf [filename].
2. Change to the directory where the archive was unpacked.
3. Change to the subdirectory that corresponds to the Linux distribution to be used.
4. Run install.sh.
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Install
1. Untar and unzip the file to a local hard drive or other storage media using tar -xzvf [filename].
2. Change to the directory where the archive was unpacked.
3. Change to the subdirectory that corresponds to the Linux distribution to be used.
4. Run install.sh.
適用於
Emulex LightPulse LPe31000-M6-D 1-Port 16Gb Fibre Channel Adapter
Emulex LightPulse LPe31002-M6-D 2-Port 16Gb Fibre Channel Adapter
Emulex LightPulse LPe32000-M2-D 1-Port 32Gb Fibre Channel Adapter
Emulex LightPulse LPe32002-M2-D 2-Port 32Gb Fibre Channel Adapter
Emulex LightPulse LPe35000-M2 1-Port 32Gb Fibre Channel Adapter
Emulex LightPulse LPe35002-M2 2-Port 32Gb Fibre Channel Adapter
Emulex LPm31002-D Dual Port FC16 Fibre Channel Mezz Card for MX-series servers
Emulex LPm32002-D Dual Port FC32 Fibre Channel Mezz Card for MX-series servers
LightPulse LPE1200x FC8 HBA
LightPulse LPE1205-M FC8 HBA