VMware Horizon Client v4.9 add-on for Windows Embedded Standard operating system
需要重新啟動 已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
VMware Horizon Client v4.9 add-on for Windows Embedded Standard operating system
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
-Configuring display scaling for all remote desktops and published applications
-Configuring a keyboard shortcut to switch display settings
-Starting Horizon Client in minimized mode
-RDS host per-device CAL licensing improvements in a Cloud Pod Architecture environment
-Configuring Horizon client data sharing
-Redirecting serial ports for published desktops and applications
-Client drive redirection improvements
-Installing the 32-bit skype for business plugin on a 64-bit windows operating system
閱讀更多-Configuring a keyboard shortcut to switch display settings
-Starting Horizon Client in minimized mode
-RDS host per-device CAL licensing improvements in a Cloud Pod Architecture environment
-Configuring Horizon client data sharing
-Redirecting serial ports for published desktops and applications
-Client drive redirection improvements
-Installing the 32-bit skype for business plugin on a 64-bit windows operating system
繁體中文版
4.9, 4.9
發佈日期
23 11月 2018
下載類型
應用程式
類別
應用程式
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 韌體影像
檔案名稱： VMwareHorizonClient_4_9_WES7.exe
檔案大小： 236.91 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
為了確保下載的完整性，請驗證總和檢查值。
MD5：
07e46b03ede6f5cd64e903117bced6d0
SHA1：
0f3b78ad44e13e6fb3abaa5327ece18f7335f770
SHA-256：
ddd7f0e162da17b78b45bea7af3e5fcd2d8d150f551820fcf8cffd83799ec1f4
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
Do not power off your system during firmware upgrade or installation.
安裝指示
Instructions to Register a Package using Wyse Device Manager (WDM)
1 Launch Wyse Device Manager.
2 Click Applications in the Dell Wyse Device Manager Dashboard page.
3 Select any of the options except Device Configuration, and PCoIP Device Configuration.
4 Click the Create Package Plus (+) button.
5 Click Allow to download the Package Register utility.
6 Download the .exe file on your local repository.
7 Navigate to the folder and run the Package Register utility file.
8 Enter WDM server address and User credentials in the respective fields.
9 Select EXE to register and click Browse.
10 Select .EXE file to register and click Open.
11 Select the package that you want to register and click Upload.
Instructions to Register and deploy a package using Wyse Management Suite
1 Log in to WMS Server and download exe file to your system.
2 Add the compressed ZIP folder to repository at C:\WMS\Local Repo
epository
spPackages\zipped on the Wyse Management Suite server and wait for 20-30 minutes. The compressed folder is extracted automatically, and are copied to C:\WMS\LocalRepo
epository
spPackages\valid.
3 Log in to Wyse Management Suite.
4 Click Portal Administration, and select Local Repository.
5 Click Sync Files and go to Apps & Data.
The Registered package is displayed under OS Image Repository.
6 To create a group in the Wyse Management Suite server, click Groups.
7 Click the Plus sign (+) button, and register your client in the same group.
8 Click the Apps and Data option, and click OS Image Policies.
9 Click Add Policy and update the required details.
10 To create a policy, go to Apps & Data, and click OS Image policies.
11 Click Add policy and configure the following options.
Policy name- WIE10
Group- Select as Default (or any created group)
OS Type- WES
OS Subtype filter- WIE10 (Windows 10 IoT Enterprise)
Platform Filter- None (optional)
OS Image-Select the registered package
Rule- Force this version
Apply policy automatically-Do not apply automatically
12 Click Save.
13 Select the registered device and go to More actions.
14 Click Update WES image.
15 Enter the description and select the desired option, and then click the Preview button.
16 Click the Schedule button in Image Update job window.
17 Click Update Now at the client side.
18 Go to Job status and monitor Job.
Instructions to schedule an image from System Center Configuration Manager 2016 (SCCM)
Client Side Configuration
1 Add the client to the domain.
Note: Ensure that the client and SCCM server are in the same Domain.
2 Login as a Domain Admin user.
3 Change Time zone to SCCM server time zone.
4 Go to Control Panel, and click Configuration Manager.
5 Click the Site Tab, and click Configure Setting button.
6 Click Find Site button.
7 Click the Actions Tab.
8 Configure the action items and click Apply
Note: If you do not get all action items as soon as you open Configuration Manager, reboot the client and log in as domain administrator.
9 Open Software Center.
10 Go to Options and click Computer Maintenance.
11 Deselect the suspend policy and select the automatic install policy..
12 Sync the policy and click Apply
Server-side Configuration
1 Copy the pulled *.wim file, PrepareOSPartion.wss & sysprep.xml files to shared folder.
2 Open SCCM console.
3 Go to Assets and Compliance tab.
4 Right-click Device Collection and click Create New Device Collection.
5 Create the new device collection by selecting all systems as limitations.
6 Go to Devices page, select the client and add the client to the created device collection.
7 Go to Operating Systems and Create the OS Package by adding WIM file.
8 Right-click the created OS package, and select distribute content.
9 After distribution, create the task sequence.
11 Right-click Task sequence and click Create Task sequence.
12 Edit the task.
13 Right click Task Sequence, and click Deploy.
1 Launch Wyse Device Manager.
2 Click Applications in the Dell Wyse Device Manager Dashboard page.
3 Select any of the options except Device Configuration, and PCoIP Device Configuration.
4 Click the Create Package Plus (+) button.
5 Click Allow to download the Package Register utility.
6 Download the .exe file on your local repository.
7 Navigate to the folder and run the Package Register utility file.
8 Enter WDM server address and User credentials in the respective fields.
9 Select EXE to register and click Browse.
10 Select .EXE file to register and click Open.
11 Select the package that you want to register and click Upload.
Instructions to Register and deploy a package using Wyse Management Suite
1 Log in to WMS Server and download exe file to your system.
2 Add the compressed ZIP folder to repository at C:\WMS\Local Repo
epository
spPackages\zipped on the Wyse Management Suite server and wait for 20-30 minutes. The compressed folder is extracted automatically, and are copied to C:\WMS\LocalRepo
epository
spPackages\valid.
3 Log in to Wyse Management Suite.
4 Click Portal Administration, and select Local Repository.
5 Click Sync Files and go to Apps & Data.
The Registered package is displayed under OS Image Repository.
6 To create a group in the Wyse Management Suite server, click Groups.
7 Click the Plus sign (+) button, and register your client in the same group.
8 Click the Apps and Data option, and click OS Image Policies.
9 Click Add Policy and update the required details.
10 To create a policy, go to Apps & Data, and click OS Image policies.
11 Click Add policy and configure the following options.
Policy name- WIE10
Group- Select as Default (or any created group)
OS Type- WES
OS Subtype filter- WIE10 (Windows 10 IoT Enterprise)
Platform Filter- None (optional)
OS Image-Select the registered package
Rule- Force this version
Apply policy automatically-Do not apply automatically
12 Click Save.
13 Select the registered device and go to More actions.
14 Click Update WES image.
15 Enter the description and select the desired option, and then click the Preview button.
16 Click the Schedule button in Image Update job window.
17 Click Update Now at the client side.
18 Go to Job status and monitor Job.
Instructions to schedule an image from System Center Configuration Manager 2016 (SCCM)
Client Side Configuration
1 Add the client to the domain.
Note: Ensure that the client and SCCM server are in the same Domain.
2 Login as a Domain Admin user.
3 Change Time zone to SCCM server time zone.
4 Go to Control Panel, and click Configuration Manager.
5 Click the Site Tab, and click Configure Setting button.
6 Click Find Site button.
7 Click the Actions Tab.
8 Configure the action items and click Apply
Note: If you do not get all action items as soon as you open Configuration Manager, reboot the client and log in as domain administrator.
9 Open Software Center.
10 Go to Options and click Computer Maintenance.
11 Deselect the suspend policy and select the automatic install policy..
12 Sync the policy and click Apply
Server-side Configuration
1 Copy the pulled *.wim file, PrepareOSPartion.wss & sysprep.xml files to shared folder.
2 Open SCCM console.
3 Go to Assets and Compliance tab.
4 Right-click Device Collection and click Create New Device Collection.
5 Create the new device collection by selecting all systems as limitations.
6 Go to Devices page, select the client and add the client to the created device collection.
7 Go to Operating Systems and Create the OS Package by adding WIM file.
8 Right-click the created OS package, and select distribute content.
9 After distribution, create the task sequence.
11 Right-click Task sequence and click Create Task sequence.
12 Edit the task.
13 Right click Task Sequence, and click Deploy.