下載檔案
檔案格式： Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
檔案名稱: ESM_FRMW_WIN_R169464.EXE
檔案大小: 3.57 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 0B98CF0DA1E9A7BE049DEAF4CB06B04C
檔案格式： 您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
檔案名稱: ESM_FRMW_LX_R169464.BIN.sign
檔案大小: 194 Bytes
為了確保下載的完整性，請驗證總和檢查值。
MD5： 8D99825AFDE8B3487BE3B3A85251F216
檔案格式： 此檔案格式內含檔案封存，且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
檔案名稱: PE2900BmcA05.exe
檔案大小: 329 KB
為了確保下載的完整性，請驗證總和檢查值。
MD5： d8b5840424d7546bf9739d4d102672ef
檔案格式： 適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
檔案名稱: ESM_FRMW_LX_R169464.BIN
檔案大小: 2.67 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 6839DEDDA2FDA85F4EBE29DAE9D179F6
修復及強化
DHCP Host Name:
Twenty One character customer configurable DHCP HOST NAME which is registered at the DHCP Server.
By default the seven character service tag is used as DHCP Host Name.
重要資訊
###############################################################
Important Information for Update Packages for Microsoft Windows
###############################################################
* Do not run other applications while executing Dell Update Packages.
* When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
* When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source "IPMIDRV" with Event ID 1004 are logged in the System Log in the Event Viewer console.
These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
###################################################
Important Information for Update Packages for Linux
###################################################
* Do not run other applications while executing Dell Update Packages.
* If the following error occurs, "Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory", you must install the compatibility libraries from "www.redhat.com" or from the Red Hat CD. To install the compatibility libraries, use the following command: "RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"
* Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at "support.dell.com".
安裝指示
Instructions for ESM_FRMW_LX_R169464.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./ESM_FRMW_LX_R169464.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./ESM_FRMW_LX_R169464.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for ESM_FRMW_LX_R169464.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, ESM_FRMW_LX_R169464.BIN.sign
Instructions for ESM_FRMW_WIN_R169464.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Instructions for PE2900BmcA05.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.