下載檔案
檔案格式： 此檔案格式包含 BIOS 可執行檔。此通用 (Windows/MS DOS) 格式可用於在任何 Windows 或 MS DOS 環境中進行安裝。
檔案名稱: OptiPlex 5055 Ryzen CPU_1.1.10.exe
檔案大小: 7.1 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 1325f04c4df687f3787676d1540814be
SHA1： 4d43cb39054ce4f3c540b3c6543ef94e324b9bbd
SHA-256： bfade23d470f490b9f5ea8e29df531b441455ca26d44f8c28dd64c46dd0c8200
修復及強化
Fixes
- Fix 'Save to File' not available in certain condition
- Fix hard disk password port naming to follow the SATA port number.
- Fix PXE item list in 'Enable Boot Devices' under Boot Sequence from UEFI to Legacy mode
- Fix 'Block Sleep' can't load default after select 'Load BIOS Defaults' in BIOS Recovery screen
- Fix can't entry BIOS Setup by press 'ESC' at hard disk password prompt
- Fix sometimes can't entry BIOS Setup with password enabling
- Fix system couldn't boot from ODD under RAID mode.
Enhancements
- Enhance the ODD option in Boot Option under Boot Menu.
重要資訊
Please make sure your display cable is connected to discrete graphic output for this platform don't support internal graphic output.
安裝指示
BIOS Update Executable for Windows
Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Update" in the section.
6. Click on the "Flash from file" to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Submit"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Update BIOS!"
10. Reviewing the Warning message and click "Confirm Update BIOS!" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
--------------------------------------------------------------------------------------------------
Note 1: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.