Dell EMC Server PowerEdge BIOS R840/R940xa Version 2.12.2

When you try updating a BIOS version either under OS (by using an Update Package (DUP)) or under UEFI Shell (a .efi file), the system may take more time to complete the BIOS update process (in case of a system that has 14 TB memory, it takes around 30 minutes to complete the BIOS update process under Windows Server 2016). There are two ways to work around this issue:
- Use an out-of-band BIOS update method--IDRAC Graphical User Interface (GUI) or RACADM Command Line Interface (CLI) command.
- Physically reduce the memory capacity by removing a few memory modules (improves the speed of the BIOS update process), and then try again.

When you try installing one or more PCIe devices on the system and if the cards require more limited legacy I/O resources, then the system may adjust the legacy I/O resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0256 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up legacy I/O space.
- Go to System Setup and disable unused PCIe card to free up legacy I/O space.

When you try installing one or more PCIe devices on the system and if the cards require more MMIO resources, then the system may adjust the MMIO resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0134 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up MMIO space.
- Go to System Setup and enable the "Memory Mapped I/O above 4GB" option

Dell EMC Update Package Instructions for EFI
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.

You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign