Dell G3 3500/G5 5500 System BIOS

需要重新啟動

請勿在更新 BIOS 時將電腦關機或拔除電源，電腦可能因此受損。更新期間，電腦將重新啟動，並且會暫時顯示黑色畫面。

更新前，請閱讀以下所述的安裝說明與重要資訊。

驅動程式 ID : RWVPK

重要性 : 重大

繁體中文版 : 1.4.2, 1.4.2 最新版本建議版本最新與建議版本

發佈日期 : 05 8月 2020

下載類型 : 系統 BIOS

類別 : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisory INTEL-SA-00295. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

下載檔案

檔案格式： 此檔案格式包含 BIOS 可執行檔。此通用 (Windows/MS DOS) 格式可用於在任何 Windows 或 MS DOS 環境中進行安裝。

檔案名稱: G3_3500_G5_5500_1.4.2.exe

檔案大小: 14.02 MB

為了確保下載的完整性，請驗證總和檢查值。

MD5： ab82e0e0e92e60f0098e23ed507265b9

SHA1： b04ffd7b308f09073b2c6e0d2cc7c92470d02a46

SHA-256： b0ed5f02e0030befaaa30a893b84bbc8ae293be81fb9bdff5980e810a4703745

下載 .EXE

修復及強化

- Firmware updates to address the Intel Security Advisory INTEL-SA-00295 (CVE-2020-0534, CVE-2020-0536, CVE-2020-0539, CVE-2020-0541, and CVE-2020-0542).
- Fixed the issue where the system stops responding at the Dell logo screen. This issue occurs when you press F2 or F12 to enter the BIOS setup menu.
- Fixed the issue where options such as Thermal Management and Battery Charge Configuration are not displayed. This issue occurs when the Lid Switch option is disabled in the BIOS setup menu.

安裝指示

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Dell G3 3500/G5 5500 System BIOS

下載檔案

修復及強化

重要資訊

相容的系統

支援的作業系統

安裝指示

適用於