下載檔案
檔案格式： 此檔案格式包含 BIOS 可執行檔。此通用 (Windows/MS DOS) 格式可用於在任何 Windows 或 MS DOS 環境中進行安裝。
檔案名稱: M17R4A12WIN.exe
檔案大小: 4.44 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： cc111ffe8028d71fd30180f8152d7c0a
SHA1： ee028edf9c9bb9ee9cb1a8a5040b02f01d8f941a
SHA-256： 61a695faaa7d6912322a5b70d33cd22a2855aa42c4352e8394c0cc3712e95e82
修復及強化
Fixes
-Not Applicable
Enhancements
-Enhanced SMBIOS TYPE01 Offset 19h to Product name.
-Enhanced update DIMM isolation protocol.
-Enhanced update ePSA to 4220A10.(4220.11).
支援的作業系統
Windows 7, 64-bit
Windows 8, 64-bit
安裝指示
BIOS Update Executable for Windows/DOS
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select ""USB Storage Device"" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to ""Boot > Boot List Option"".
3. Change ""UEFI"" to ""Legacy"" of Boot List Option
4. Go to ""Exit > Exit Save Changes"" and reboot system.
5. Press F12, then Select ""USB Storage Device"" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to ""Boot > Boot List Option"".
9. Change ""Legacy"" to ""UEFI"" Boot Option.
10. Go to ""Exit > Exit Save Changes"" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.