Seagate ST500LM000/ST1000LM014 Firmware Update

WARNING: As with all firmware updates, it is recommended that you backup or make copies of all important files before performing this update. This firmware update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the firmware process is interrupted for any reason, your drive may not function properly.

Download
1. Download and execute Kahuna V_ZPE.exe.
2. Select Continue and take note of the unzip location.

Installation
1. Run SeagateFirmwareUpdate_SeaFlash_Dell_Kahuna_UUU_FDL_KernelV4.7_New_Config_09-28-2016_13-54-18.exe as administrator.
2. On the first screen, select your language and then select OK.
3. Select Next on the welcome screen.
4. The next screen is a warning screen, read and select Next if you agree.
5. The next screen is the License Agreement screen. If you agree, click "I agree" and then click Next.
6. A screen appears asking you to close and save all applications and to back up your data. When you are ready to start the firmware update, check the "Begin firmware update procedure", and then click Proceed.
7. The system reboots and loads the firmware. Once the firmware update is complete the system will boot up into Windows normally.