下載檔案
檔案格式: 此檔案格式包含 BIOS 可執行檔。此通用 (Windows/MS DOS) 格式可用於在任何 Windows 或 MS DOS 環境中進行安裝。
檔案名稱: Precision_7x10_1.3.10.exe
檔案大小: 9.09 MB
為了確保下載的完整性,請驗證總和檢查值。
MD5: 42b37189545506274ca5c7c0a974eb10
SHA1: 8199c4d7238fa0f744bf0b9658c4bd9eb7b447bb
SHA-256: f8547cf4d58c40d816b35b462d954e624d428f237bdbe8056434dfc5a8679d7f
修復及強化
Fixes:
- Fixed the USB KB/Mouse not working smoothly in Windows 7 with attaching in the Dell Thunderbolt Dock.
- Fixed Type-C port still can detect USB storage device when disable external USB port.
Enhancements:
- Support Dell Thunderbolt Dock.
- Support Dell Dock.
- Support Type-C/Thunderbolt technology.
- Support Trusted Platform Module 2.0 feature in Microsoft Windows 10.
- Updated Intel CPU microcode.
- Updated Intel Management Engine Firmware.
- Updated Intel Graphic BIOS/GOP.
重要資訊
Important:
- Downgrade BIOS to version earlier than 1.3.10 is not allowed after BIOS is updated to version 1.3.10 due to Security concern and stability concern.
安裝指示
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLockerencryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
適用於
Precision 7510 system BIOS