SK Hynix SC300 M.2 Solid State Drive Firmware Update
需要重新啟動 已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the firmware for SK Hynix SC300 M.2 2280 128GB/256GB/512GB, Revision 20101P00, and is supported on Inspiron, Latitude, OptiPlex, Precision and XPS models running the following Windows operating systems: Windows 7, Windows 8, Windows 8.1 and Windows 10.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes:
- Fixes an issue which can cause the SSD to occasionally not wake up from low power mode
Enhancement:
- Not Applicable
閱讀更多- Fixes an issue which can cause the SSD to occasionally not wake up from low power mode
Enhancement:
- Not Applicable
繁體中文版
20101P00, A00
發佈日期
18 1月 2017
下載類型
韌體
類別
儲存
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： ZipPack 外接
檔案名稱： SK Hynix SC300 M.2 Solid State Drive Firmware Update_ZPE.exe
檔案大小： 15.31 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
00bd54fd909e39143fd7f29b64a1afca
SHA1：
8b85aa16a9ffe3ce73fe95cd26fb8510c213065c
SHA-256：
e3e18a656789af1bf83aa02969ea8d4e8ae3fc331f3e69f829f298ccaecbcc24
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
- There is the User Account Control warning message popup when launching the tool since this tool runs as administrator. Then, please press Yes to run this tool.
- This tool supports only internal SATA cable connection.
- For important data, it is recommended to save data or keep it backup before updating the firmware.
- Please DO NOT power off or disconnect the solid state drive from host during firmware update is in progress. It could make the drive does not work.
- This tool supports only internal SATA cable connection.
- For important data, it is recommended to save data or keep it backup before updating the firmware.
- Please DO NOT power off or disconnect the solid state drive from host during firmware update is in progress. It could make the drive does not work.
支援的作業系統
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
適用於
HYNIX SC300 128G M.2 2280 SATA SSD (CLASS 20)
HYNIX SC300 256G M.2 2280 SATA SSD (CLASS 20)
HYNIX SC300 512G M.2 2280 SATA SSD (CLASS 20)
安裝指示
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
ATTENTION
1. Backup the SSD.
2. Switch to AC Power
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
Procedure
1. Go to the directory containing the download package as noted above.
2. Run the firmware update utility with administrator privilege (right-click on the executable, then select "Run as administrator").
3. Follow the on-screen instructions.
4. Check if status is "Ready" in [Update] column.
5. Select a drive(s) in list. The [FW Update] button will be enabled when selected drive is SK Hynix SSD.
6. Click [FW Update].
7. If the update is successful, it displayed in green, otherwise displayed in red.
8. After finishing the update successfully, the tool will ask to reboot the system. If you want to reboot the system, click [OK] button otherwise click [Cancel] button if you want to do later.
------------------------------------------------------------------------------------------
Firmware upgrade using the bootable image
1. An ISO image is provided in the download package. Use that image to create a bootable USB thumb drive. You may want to consider using UNetBootin.
2. Boot the system from the USB thumb drive created in Step 1.
3.Your PC will boot up with Linux booting screen and it displays SSDs that connected to your PC.
4. The FW update tool will seek SK Hynix SC300 SSD. If the tool find a SK Hynix SC300, it will start to update automatically, if not it displays an error message.
5. After successful FW update, PC will shutdown after about 10 sec.
1. Prepare a USB thumb drive
(1) USB storage and ISO image Writer(like UNetBootin) are needed for updating SSD FW with this package.
(2) Run unetbootin-windows-608.exe
(3) Check 'DiskImage' button and select path to ISO file using the ' ... ' option button.
(4) If USB Drive is ready, then UNetbooin will show the driver letter.
(5) Select OK to copy ISO bootable image to USB thumb drive
(6) Once installation is completed, please follow the next steps on UNetbootin Window.
*.Installation Instructions:
For the detail usage of this package, Please refer to the attached Update Tool Manual.
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
ATTENTION
1. Backup the SSD.
2. Switch to AC Power
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
Procedure
1. Go to the directory containing the download package as noted above.
2. Run the firmware update utility with administrator privilege (right-click on the executable, then select "Run as administrator").
3. Follow the on-screen instructions.
4. Check if status is "Ready" in [Update] column.
5. Select a drive(s) in list. The [FW Update] button will be enabled when selected drive is SK Hynix SSD.
6. Click [FW Update].
7. If the update is successful, it displayed in green, otherwise displayed in red.
8. After finishing the update successfully, the tool will ask to reboot the system. If you want to reboot the system, click [OK] button otherwise click [Cancel] button if you want to do later.
------------------------------------------------------------------------------------------
Firmware upgrade using the bootable image
1. An ISO image is provided in the download package. Use that image to create a bootable USB thumb drive. You may want to consider using UNetBootin.
2. Boot the system from the USB thumb drive created in Step 1.
3.Your PC will boot up with Linux booting screen and it displays SSDs that connected to your PC.
4. The FW update tool will seek SK Hynix SC300 SSD. If the tool find a SK Hynix SC300, it will start to update automatically, if not it displays an error message.
5. After successful FW update, PC will shutdown after about 10 sec.
1. Prepare a USB thumb drive
(1) USB storage and ISO image Writer(like UNetBootin) are needed for updating SSD FW with this package.
(2) Run unetbootin-windows-608.exe
(3) Check 'DiskImage' button and select path to ISO file using the ' ... ' option button.
(4) If USB Drive is ready, then UNetbooin will show the driver letter.
(5) Select OK to copy ISO bootable image to USB thumb drive
(6) Once installation is completed, please follow the next steps on UNetbootin Window.
*.Installation Instructions:
For the detail usage of this package, Please refer to the attached Update Tool Manual.