請勿在更新 BIOS 時將電腦關機或拔除電源，電腦可能因此受損。更新期間，電腦將重新啟動，並且會暫時顯示黑色畫面。
更新前，請閱讀以下所述的安裝說明與重要資訊。
Dell Inspiron 7472 and Inspiron 7572 System BIOS
需要重新啟動 已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package contains the Dell system BIOS update and is supported on Dell Inspiron 7472 and 7572 systems that run Windows and DOS operating systems. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices. This package reduces the fan noise
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes:
- N/A
Enhancements:
- Reduces the fan noise.
閱讀更多- N/A
Enhancements:
- Reduces the fan noise.
繁體中文版
1.1.8, 1.1.8
發佈日期
20 11月 2018
下載類型
系統 BIOS
類別
BIOS
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檔案格式： Windows/DOS 的 CPG BIOS 執行檔
檔案名稱： Inspiron_7472_7572_1.1.8.exe
檔案大小： 6.54 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式包含 BIOS 可執行檔。此通用 (Windows/MS DOS) 格式可用於在任何 Windows 或 MS DOS 環境中進行安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
d05a10e0b9e970ed39ce0172430923d7
SHA1：
5a09ec14a528d496dce5df490f702678ee28e7d3
SHA-256：
e31914a565729d569c4562d7505f992bb8bab8f8d690f18aff0fef924dc5e3fb
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
適用於
Dell Inspiron Astro MLK
安裝指示
Updating the BIOS through Windows
1. Click Download File, to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
Windows System restarts automatically and updates BIOS at the system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with Legacy boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option ROM Disabled)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Save Changes and reboot system.
5. Press F12 and then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After the BIOS update is finished, system will reboot automatically.
7. Go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
8. Change Legacy to UEFI Boot Option.
9. Load Legacy Option ROM->Enabled
10. Go to Exit > Save Changes and reboot system.
1. Click Download File, to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
Windows System restarts automatically and updates BIOS at the system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with Legacy boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option ROM Disabled)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Save Changes and reboot system.
5. Press F12 and then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After the BIOS update is finished, system will reboot automatically.
7. Go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
8. Change Legacy to UEFI Boot Option.
9. Load Legacy Option ROM->Enabled
10. Go to Exit > Save Changes and reboot system.