Alienware Aurora R6 System BIOS

需要重新啟動

請勿在更新 BIOS 時將電腦關機或拔除電源，電腦可能因此受損。更新期間，電腦將重新啟動，並且會暫時顯示黑色畫面。

更新前，請閱讀以下所述的安裝說明與重要資訊。

hi testing

驅動程式 ID : CMY69

重要性 : 重大

繁體中文版 : 1.0.20, 1.0.20 最新版本建議版本最新與建議版本

發佈日期 : 11 7月 2019

下載類型 : 系統 BIOS

類別 : BIOS

This package contains the Dell system BIOS update for Dell Alienware Aurora R6 system that runs the Windows and DOS operating systems. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices. This update addresses the Intel security advisories INTEL-SA-00213 and INTEL-SA-00233. A security advisory is a statement when a product is impacted by a security vulnerability and a remedy is available.

下載檔案

檔案格式： 此檔案格式包含 BIOS 可執行檔。此通用 (Windows/MS DOS) 格式可用於在任何 Windows 或 MS DOS 環境中進行安裝。

檔案名稱: Alienware_Aurora_R6_1.0.20.exe

檔案大小: 6.31 MB

為了確保下載的完整性，請驗證總和檢查值。

MD5： 2240b9e68c35c5286a845306c5c4d92d

SHA1： e8acf54ca543cf26bd3dbf65f32ccbd3a448725c

SHA-256： 2941fb5a407c3f5066bd138f5575f1c7d10644fac2658ddf520c3a37146e685a

下載 .EXE

安裝指示

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Run the BIOS update utility from Windows environment.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Run the BIOS update utility from DOS environment (Non-Windows users)

Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Precision_5530_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Precision_5530_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option Disabled)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes and reboot the system.

Alienware Aurora R6 System BIOS

下載檔案

修復及強化

相容的系統

支援的作業系統

安裝指示

適用於