下載檔案
檔案格式： 此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
檔案名稱: Toshiba KBG3AZMS256G D35W2_ZPE.exe
檔案大小: 2.9 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： b53c2d1cd02592f04b70a7c04039b067
SHA1： a842f9cccdd771a9a4ea02cf675fd64cc1ed60e9
SHA-256： e50e4298e594421707d4e7f9184b8484286afe0aec146ed7f7e09c6dd7856809
修復及強化
- Fixed the issue where a Windows error message is displayed during the Modern Standby power mode.
重要資訊
You must backup all the important files before performing this update. If the firmware process is interrupted for any reason, your solid state drive may not function properly.
支援的作業系統
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
安裝指示
Firmware upgrade through the Windows utility
Procedure
1. Run the utility to start the firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then click Update.
The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding.
3. Click OK to proceed.
Firmware upgrade proceeds. When the firmware upgrade process completes, you are prompted to reboot the system.
4. Close all open applications, and save your work before rebooting the system.
The system reboots and loads the firmware. Once the firmware update is complete, a message saying the firmware update done is displayed.
5. Sign in to the operating system.
6. To confirm that the firmware update was successful, open Device manager > open SSD> click Properties> choose hardware ID under Details and check the firmware version.
適用於
TOSHIBA BG3 256G SED OPAL2 PCIE NVME 2230 SSD (CLASS 35)