PLDS Optical Disk Drive Firmware Update
需要重新啟動 已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the firmware for PLDSDH-16AES, Revision DD12, and is supported on Inspiron, Vostro, OptiPlex, XPS and Precision models running the following Windows operating systems: Windows 7, Windows 8, Windows 8.1 and Windows 10
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes:
- Improvement for some version of DVDRAM media
Enhancement:
- Not Applicable
閱讀更多- Improvement for some version of DVDRAM media
Enhancement:
- Not Applicable
繁體中文版
DD12, A01
發佈日期
26 1月 2016
下載類型
韌體
類別
儲存
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： ZipPack 外接
檔案名稱： DH-16AES-DD12_ZPE.exe
檔案大小： 2.6 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
db772077464e23019c120b82cd4ddbdb
SHA1：
cf44ccc24d9b4b2e52eef2dd3ddfb73ab9f3d309
SHA-256：
c5cd1000af1ba3e4a94a3363048223f6469f771cc3b2435d8b5ee88a6356dee6
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
1. Please backup data in the HDD, or at least make copies of all important files stored in the HDDbefore executing this firmware update.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
支援的作業系統
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
適用於
ASSY,DVD+/-RW,16X,HH,BARE,PLDS
安裝指示
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
ATTENTION
1. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the Warning windows, select "Yes".
3. On the Flash Program for... windows, if the target ODD is not listed, select it and then click "Update".
4. Firmware upgrade will proceed. When the firmware upgrade process completes, it will prompt a successful message, click "Yes".
5. On the Reboot Warning windows, you can click "Now" to reboot operating system.
6. Go into the Windows, to confirm the firmware update was successful, open device manager -> open ODD -> click Properties -> choose hardware ID under Details and check the firmware version.
------------------------------------------------------------------------------------------
Firmware upgrade through the DOS utility
ATTENTION
1. Switch AC Power.
2. The DOS utility supports only Intel systems.
Procedure
1. Boot your system into DOS from USB or CD/DVD drive (for instructions, please refer to the manual that came with your system).
2. Go into the Dos sub-directory execute the DOS utility.
3. Scanning target ODD then press "Y" of the keyboard.
4. On the Flash Program for... windows, if the target ODD is not listed, select number of the target ODD.
5. Firmware upgrade will proceed. When the firmware upgrade process completes, it will prompt a successful message.
6. You can press "Y" of the keyboard to reboot operating system.
7. To confirm the firmware update was successful, boot your system into Windows then open Device manager -> open ODD -> click Properties -> choose hardware ID under Details and check the firmware version.
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
ATTENTION
1. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the Warning windows, select "Yes".
3. On the Flash Program for... windows, if the target ODD is not listed, select it and then click "Update".
4. Firmware upgrade will proceed. When the firmware upgrade process completes, it will prompt a successful message, click "Yes".
5. On the Reboot Warning windows, you can click "Now" to reboot operating system.
6. Go into the Windows, to confirm the firmware update was successful, open device manager -> open ODD -> click Properties -> choose hardware ID under Details and check the firmware version.
------------------------------------------------------------------------------------------
Firmware upgrade through the DOS utility
ATTENTION
1. Switch AC Power.
2. The DOS utility supports only Intel systems.
Procedure
1. Boot your system into DOS from USB or CD/DVD drive (for instructions, please refer to the manual that came with your system).
2. Go into the Dos sub-directory execute the DOS utility.
3. Scanning target ODD then press "Y" of the keyboard.
4. On the Flash Program for... windows, if the target ODD is not listed, select number of the target ODD.
5. Firmware upgrade will proceed. When the firmware upgrade process completes, it will prompt a successful message.
6. You can press "Y" of the keyboard to reboot operating system.
7. To confirm the firmware update was successful, boot your system into Windows then open Device manager -> open ODD -> click Properties -> choose hardware ID under Details and check the firmware version.