請勿在更新 BIOS 時將電腦關機或拔除電源，電腦可能因此受損。更新期間，電腦將重新啟動，並且會暫時顯示黑色畫面。
更新前，請閱讀以下所述的安裝說明與重要資訊。
Dell EMC Server PowerEdge BIOS R440/R540/T440 Version 1.4.5
需要重新啟動 已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides BIOS firmware version 1.4.5 for Dell EMC Server PowerEdge. Improvements include added support for HDD and USB placeholders in UEFI Boot Sequence, updated Intel Processor and Memory Reference Code to PLR5, updated IP4 stack to support point-to-point link with the 31-bit mask, and more.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
- TPM region is not reserved in the E820 table.
- Updated the IP4 stack to support point-to-point link with the 31-bit mask.
- Able to set 'System Password' in HII when the 'System Lockdown Mode' is enabled.
Enhancements
- Added a check to prevent BIOS downgrade when 18nm DIMMs are installed in 2 DPC (DIMMs per Channel) configuration and memory frequency is 2666 Mhz or higher. For more information, visit http://www.dell.com/support/article/SLN309212.
- Added support for HDD and USB placeholders in UEFI Boot Sequence.
- Added capability to re-enable a disabled PCIe clock after a warm reboot.
- Added enhancements to UEFI BIOS update tool. Users cannot use UEFI BIOS update utilities to downgrade BIOS to earlier version once the 1.4.5 or later BIOS version is installed on the system.
Note: Update Package can still be used to downgrade BIOS to versions earlier than 1.4.5.
- Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.5.
- Updated the Intel Processor and Memory Reference Code to PLR5.
閱讀更多- TPM region is not reserved in the E820 table.
- Updated the IP4 stack to support point-to-point link with the 31-bit mask.
- Able to set 'System Password' in HII when the 'System Lockdown Mode' is enabled.
Enhancements
- Added a check to prevent BIOS downgrade when 18nm DIMMs are installed in 2 DPC (DIMMs per Channel) configuration and memory frequency is 2666 Mhz or higher. For more information, visit http://www.dell.com/support/article/SLN309212.
- Added support for HDD and USB placeholders in UEFI Boot Sequence.
- Added capability to re-enable a disabled PCIe clock after a warm reboot.
- Added enhancements to UEFI BIOS update tool. Users cannot use UEFI BIOS update utilities to downgrade BIOS to earlier version once the 1.4.5 or later BIOS version is installed on the system.
Note: Update Package can still be used to downgrade BIOS to versions earlier than 1.4.5.
- Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.5.
- Updated the Intel Processor and Memory Reference Code to PLR5.
繁體中文版
1.4.5, 1.4.5
發佈日期
11 6月 2018
下載類型
系統 BIOS
類別
BIOS
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (64 位元) 的更新套件。
檔案名稱： BIOS_HM99G_WN64_1.4.5.EXE
檔案大小： 26.11 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
如果 Dell 更新套件為原生 Microsoft Windows 64 位元格式，則不需要在 Microsoft Windows Server 安裝 Microsoft WOW64。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
ae440328b10a2ab938a3b2e9cbfaf44a
SHA1：
c619caa877f9d210ecd82f93412f646ef9eca20d
SHA-256：
6bcbde14218be6cc9a4134a8b5afb590d1d688c018723e7c431c7e57c3109a41
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： BIOS_HM99G_LN_1.4.5.BIN.sign
檔案大小： 226 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
ca741c072bde975458ea7981a68727fa
SHA1：
8a386ba4012868437df90d47d01722b1c1dd84df
SHA-256：
6fbb4240281a1861a90dedbf9fa45c8c017d5f58d3c455ac90e2d5b4b614b4fd
檔案格式： 適用於 64 位元機器的自動解壓縮檔案
檔案名稱： BIOS_HM99G_EFI_1.4.5.efi
檔案大小： 17.77 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含可從 EFI Shell 或 EFI Boot Manager執行的壓縮內容。將檔案下載到抽取式媒體裝置的 EFI 分割區。插入抽取式媒體，然後將系統重新開機，並透過 EFI Shell 或 EFI Boot Manager 執行程式。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
a6e6736ad897beba919b2560eedbd51d
SHA1：
959b12dc40ad3f9b83bb3e82faa6d32bc8e6842b
SHA-256：
74cc93c49e9e55ceebaaa791ff549c560c51b3e5d5507bde87c29072010010a0
檔案格式： 封存的 PDF 檔案提供客戶說明及程序資訊
檔案名稱： R440R540T440_BIOS.1.4.5_RN.pdf
檔案大小： 204.47 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此格式包含 PDF 檔案的封存，可用來向客戶提供說明及程序性資訊。請務必先安裝 Adobe Acrobat Reader 以檢視此封存中的檔案。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
729e6699aaca057ef720a50dc9ff18ce
SHA1：
8d6719c2a00c1ac5d31778239d53fdcff10b5723
SHA-256：
cb6102e74113ff1a8cbabc79f019cbda9169e55c0e694eeab3aaf146da908919
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： BIOS_HM99G_LN_1.4.5.BIN
檔案大小： 26.5 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
bb7d8d9c62207b81db74b44b2cdbccac
SHA1：
7d4242970a711c6acb132e20ca31b8c703acf3d5
SHA-256：
2b47baa733bb6506df0bbe0039e4f55e2799981725e0d76fb83c9b12dd07229f
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
If the BIOS in system has not been updated for over a year, it is highly suggested to update the BIOS to the latest version.
適用於
PowerEdge BIOS
安裝指示
Dell EMC Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
----------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
----------------------------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
----------------------------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
----------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
----------------------------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
----------------------------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign