跳至主要內容
與我們連絡

Dell Networking N2000 Series, Firmware Version 6.5.3.4

需要重新啟動
驅動程式 ID : KKXRV
重要性 : 建議
繁體中文版 : 6.5.3.4, A43 最新版本 建議版本 最新與建議版本
發佈日期 : 25 2月 2019
下載類型 : 作業系統
類別 : 有線網路/無線網路/藍牙
If N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade switch to the latest version of firmware 6.5.3.4 as it contains multiple bug fixes.

New CPLD version 20 is available in release 6.5.1.1 and later (6.5.3.4) for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.5.3.4), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld ' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.

****Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.5.3.4 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****

Downgrading N3000 and N2000 Series switches from firmware version 6.5.3.4 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.

With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.5.3.4" procedure.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.5.3.4_6.5.3.34_Release_Notes(N1500_N2000_N3000_N3000E-ON_N4000_PC8100)".pdf"

下載檔案

檔案格式： 此檔案格式內含純文字，可使用標準文字編輯器予以檢視。
檔案名稱: N2000ReadMev6.5.3.4.A43.txt
檔案大小: 4.04 KB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 403ae6e2d681ccb3e7362ff67cff94e8
SHA1： 2175285e4e27b81b2ab4a4dacd6f55b8ab9621a1
SHA-256： 563668c5b99c9220bfd78d27ecf3551dc928568e18309067c5c29d5960278da3
下載 .TXT
檔案格式： 此檔案格式內含檔案封存，且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
檔案名稱: N2000v6.5.3.4.A43.zip
檔案大小: 169.16 MB
為了確保下載的完整性，請驗證總和檢查值。
MD5： 6326f0ded333c4619b4ecb17c6246844
SHA1： d4ab2d11b524e9c1bfef3c37d2627ad39534c09e
SHA-256： 1596be9269eaa296ec81633615401e7cde0bcdc820d81790b52a133229b222a3
下載 .ZIP