ADATA Solid State Drive Firmware Update
需要重新啟動 已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the firmware for ADATA IM2S3138E-128GM-B M.2 2280 128GB and IM2S3138E-256GM-B M.2 2280 256GB, Revision DA002, and is supported on Inspiron and Vostro models running the following Windows operating systems: Windows 7, Windows 8, Windows 8.1 and Windows 10.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes:
- Fixed issue encountered in some system where drive was lost during cold boot
Enhancement:
- Not Applicable
閱讀更多- Fixed issue encountered in some system where drive was lost during cold boot
Enhancement:
- Not Applicable
繁體中文版
DA002, A00
發佈日期
13 1月 2017
下載類型
韌體
類別
儲存
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： ZipPack 外接
檔案名稱： ADATA_ZPE.exe
檔案大小： 1.85 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
0a02da10b18575f3507875aeb6c3cbc7
SHA1：
41846bcfaa182471af23703d6103e56c549ffea7
SHA-256：
61d6f66efb3bb662a0a019f8cc6307d22403ecdaff795598b70f3f370f81a6dd
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
1. Please backup data in the SSD, or at least make copies of all important files stored in the SSD before executing this firmware update.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
2. No data loss is expected if the firmware update is executed properly according to the update instructions.
3. Data loss or system malfunction may result if the firmware update process is interrupted for any reason.
4. This firmware update shall be executed entirely at your own risk.
支援的作業系統
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
適用於
ADATA M2180C 128G M.2 2280 SATA SSD (Class 20)
ADATA M2180D 256G M.2 2280 SATA SSD (Class 20)
安裝指示
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
Procedure
1. Execute the "FW Update tool" by double clicking, you may see below "User Account Control" window based on your Windows system setting. Please Click "Yes" to continue.
2. The tool will scan the system and list all supported and detected SSDs. If an SSD is not listed, click on the "Scan for Drives" icon to rescan the system. If fails to detect the SSD, check the SATA connection and try again.
4. Select the drive that needs to be updated by clicking on the drive.
5. Click Update Firmware to start the firmware update.
6. A warning message will be displayed. Click Cancel to return to the drive list page, or click OK to continue.
7. After a successful firmware update, the host system and drive must be powered off to activate the new firmware.
8. Relaunch the application after powering up the host system to confirm that the firmware is up to date on the target drive.
*.Installation Instructions:
For the detail usage of this package, Please refer to the attached Update Tool Manual.
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
Procedure
1. Execute the "FW Update tool" by double clicking, you may see below "User Account Control" window based on your Windows system setting. Please Click "Yes" to continue.
2. The tool will scan the system and list all supported and detected SSDs. If an SSD is not listed, click on the "Scan for Drives" icon to rescan the system. If fails to detect the SSD, check the SATA connection and try again.
4. Select the drive that needs to be updated by clicking on the drive.
5. Click Update Firmware to start the firmware update.
6. A warning message will be displayed. Click Cancel to return to the drive list page, or click OK to continue.
7. After a successful firmware update, the host system and drive must be powered off to activate the new firmware.
8. Relaunch the application after powering up the host system to confirm that the firmware is up to date on the target drive.
*.Installation Instructions:
For the detail usage of this package, Please refer to the attached Update Tool Manual.