Dell EMC Networking N2000 Series Firmware Version 6.6.0.2
需要重新啟動 已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
If N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade switch to the latest version of firmware 6.5.3.6 as it contains multiple bug fixes.
New CPLD version 20 is available in release 6.5.1.1 and later (6.6.6.0.2) for N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.6.0.2), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.
****Below information is applicable ONLY for N2000 switches upgraded to 6.6.0.2 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.6.0.2 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.6.0.2" procedure.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.6.0.2_ReleaseNotes_N1100_N1500_N2000_N2128PX_N3000E_N3132PX.pdf"
New CPLD version 20 is available in release 6.5.1.1 and later (6.6.6.0.2) for N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.6.0.2), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld
****Below information is applicable ONLY for N2000 switches upgraded to 6.6.0.2 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.6.0.2 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.6.0.2" procedure.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.6.0.2_ReleaseNotes_N1100_N1500_N2000_N2128PX_N3000E_N3132PX.pdf"
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
New Features and Enhancements:
Implementation of IEEE 802.1X-2010 specification
Dynamic ACLs per session
Enhancement to CoA implementation to handle additional RADIUS attributes - 64, 65, 81, handle bounce host port request, shutdown port request and request to re-authenticate port.
Critical Data VLAN support
RADIUS server load balanacing
RADIUS server dead actions
Net SNMP Agent
VRRPv3 support
IP SLA feature
uRPF feature
Private VLAN trunk port
SCP server funcationality
IP device tracking
RADIUS assigned trunk mode support
Authentication Open support
Redirect ACLs / URL-redirect
BGP 4 byte ASN support
BGP Graceful restart
IPv6 PBR support
Fixes:
None
閱讀更多Implementation of IEEE 802.1X-2010 specification
Dynamic ACLs per session
Enhancement to CoA implementation to handle additional RADIUS attributes - 64, 65, 81, handle bounce host port request, shutdown port request and request to re-authenticate port.
Critical Data VLAN support
RADIUS server load balanacing
RADIUS server dead actions
Net SNMP Agent
VRRPv3 support
IP SLA feature
uRPF feature
Private VLAN trunk port
SCP server funcationality
IP device tracking
RADIUS assigned trunk mode support
Authentication Open support
Redirect ACLs / URL-redirect
BGP 4 byte ASN support
BGP Graceful restart
IPv6 PBR support
Fixes:
None
繁體中文版
6.6.0.2, A00
發佈日期
03 6月 2019
下載類型
韌體
類別
有線網路/無線網路/藍牙
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 將檔案直接解壓縮至本機磁碟
檔案名稱: N2000v6.6.0.2.A46.zip
檔案大小: 180.28 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含檔案封存,且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
b9c6cfbc12ab5c4f85a39582c67334a0
SHA1:
e4abc3f5d8697306eec95e5b12fce6c75ff0bd7f
SHA-256:
df013a872cd8e2addc66f683eee8615a9ffcd564950ccbd60ddbe919b69c259e
檔案格式: 文字檔案包含方便客戶使用的修復及強化資訊
檔案名稱: N2000ReadMev6.6.0.2.A46.txt
檔案大小: 4.04 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含純文字,可使用標準文字編輯器予以檢視。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
2caf16510868c1b932d9535bc345b38b
SHA1:
d72da479b75ffdc3eaf6b47a74c51123c556c2cf
SHA-256:
a746f2270bf566af839ccdd5df52a41d1545bd69a823b1027cd40dd0f31e721b
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Implementation of IEEE 802.1X-2010 specification.
Dynamic ACLs per session with Redirect-ACLs and URL-Redirect support.
CoA support to handle RADIUS attributes - 64, 65, 81, Port-bounce, Port-shutdown and Port-reeauthenticate.
Critical Data-VLAN support.
RADIUS Server load balancing.
RADIUS Server dead actions.
Net SNMP Agent
VRRPv3 Support
IP-SLA
uRPF
Private-VLAN trunk port
SCP Server
IPDT (IP Device Tracking)
RADIUS Assigned Trunk mode support
Authentication-Open Support
BGP 4 byte ASN Support
BGP Graceful Restart
IPv6 PBR
Dynamic ACLs per session with Redirect-ACLs and URL-Redirect support.
CoA support to handle RADIUS attributes - 64, 65, 81, Port-bounce, Port-shutdown and Port-reeauthenticate.
Critical Data-VLAN support.
RADIUS Server load balancing.
RADIUS Server dead actions.
Net SNMP Agent
VRRPv3 Support
IP-SLA
uRPF
Private-VLAN trunk port
SCP Server
IPDT (IP Device Tracking)
RADIUS Assigned Trunk mode support
Authentication-Open Support
BGP 4 byte ASN Support
BGP Graceful Restart
IPv6 PBR
Dell N2024
Dell N2024P
Dell N2048
Dell N2048P
(1) Download the zip file - N2000v6.6.0.2.A46.zip
(2) Extract the image file "N2000Stdv6.6.0.2.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N2000 Series Switches From version 6.x.x.x to 6.6.0.2 Firmware.pdf" extracted from zip file.
(2) Extract the image file "N2000Stdv6.6.0.2.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N2000 Series Switches From version 6.x.x.x to 6.6.0.2 Firmware.pdf" extracted from zip file.