LITEONIT Solid State Drive Firmware Update
需要重新啟動 已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the firmware for LITEONIT LMT-256L9M MSATA 256GB, Revision HM8110B, and is supported on Latitude, XPS and Tablet models running the following Windows operating systems: Vista, Windows 7, Windows 8.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
- An incompatibility with some SMART tools
Enhancement
- Not applicable
閱讀更多- An incompatibility with some SMART tools
Enhancement
- Not applicable
繁體中文版
HM8110B, A01
發佈日期
02 5月 2014
下載類型
韌體
類別
儲存
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： ZipPack 外接
檔案名稱： LMT-256L9M-HM8110B_ZPE.exe
檔案大小： 1.51 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
6798934bd1203297a24bf8f115383133
SHA1：
534c28922fd4204f622939cec8ec78cd633bf764
SHA-256：
0cf1a1bbb60bea24b48db58892eae6bbdc01a9423e2f1cd39e6d2052dade846e
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
WARNING: As with all firmware updates, it is strongly recommended that you backup or make copies of all important files before performing this update. This firmware update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the firmware process is interrupted for any reason, your solid state drive may not function properly.
支援的作業系統
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
適用於
LITEON L9M mSATA 256G SSD
安裝指示
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then Click "Update".
3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "OK" to proceed.
4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows.
6. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
------------------------------------------------------------------------------------------
Firmware upgrade through the DOS utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch AC Power.
3. The DOS utility supports only Intel systems.
Procedure
1. Go into the DOS sub-directory.
2. Insert a blank CD-R disc into your CD/DVD R/W drive.
3. Burn the ISO image into a CD-R media.
4. Insert the CD-R (created from the above steps) into the CD-ROM/DVD drive in the target system.
5. Boot your system from the CD/DVD drive (for instructions, please refer to the manual that came with your system).
6. Please select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "Y" to proceed.
8. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Remove the CD-R from your CD/DVD drive, and reboot your system. It will boot into Windows.
9. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then Click "Update".
3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "OK" to proceed.
4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows.
6. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
------------------------------------------------------------------------------------------
Firmware upgrade through the DOS utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch AC Power.
3. The DOS utility supports only Intel systems.
Procedure
1. Go into the DOS sub-directory.
2. Insert a blank CD-R disc into your CD/DVD R/W drive.
3. Burn the ISO image into a CD-R media.
4. Insert the CD-R (created from the above steps) into the CD-ROM/DVD drive in the target system.
5. Boot your system from the CD/DVD drive (for instructions, please refer to the manual that came with your system).
6. Please select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "Y" to proceed.
8. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Remove the CD-R from your CD/DVD drive, and reboot your system. It will boot into Windows.
9. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.