Dell SAS 5/i Integrated, v.00.10.49.00.06.12.02.00, A02
已安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Dell PowerEdge SAS5i integrated Firmware release
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
BIOS FIXES/ENHANCEMENTS
1) Fixed issue where spontanious reboot may happen when attempting to enter the SAS5 BIOS using CTRL-C
With a failed drive, the BIOS would timeout port enable before the firmware was done with it.
2) Disabled verify support for SATA drives since bad block remapping is not supported on SATA
3) Corrected issue where a drive failing during verify in BIOS would hang the utility
FIRMWARE FIXES/ENHANCEMENTS
1) Fixed issue where I/O timeouts can occur during a period of very high I/O activity when one
of the targets of this activity goes missing and the Device Missing Delay feature is enabled.
2) Fixed issue where Task Management was incorrectly removing devices when any target reset was performed.
3) Fixed issue where pulling and inserting drives may cause Fault 7202 when a Direct Attach SEP device is attached to the controller.
4) Fixed issue where W2k3 enumerates the devices, after sending an Inquiry command, it then erroneously sends an Inquiry command with the EVPD bit set to the SEP device. However, the SATA-II SEP devices do not support the EVPD option. The Inquriy with EVPD bit results in a Check-Condition and the Windows driver would notice the LogInfo and then create an entry in the Windows Event Log. This event log message has been supressed
5) Added support for 2TB volumes
閱讀更多1) Fixed issue where spontanious reboot may happen when attempting to enter the SAS5 BIOS using CTRL-C
With a failed drive, the BIOS would timeout port enable before the firmware was done with it.
2) Disabled verify support for SATA drives since bad block remapping is not supported on SATA
3) Corrected issue where a drive failing during verify in BIOS would hang the utility
FIRMWARE FIXES/ENHANCEMENTS
1) Fixed issue where I/O timeouts can occur during a period of very high I/O activity when one
of the targets of this activity goes missing and the Device Missing Delay feature is enabled.
2) Fixed issue where Task Management was incorrectly removing devices when any target reset was performed.
3) Fixed issue where pulling and inserting drives may cause Fault 7202 when a Direct Attach SEP device is attached to the controller.
4) Fixed issue where W2k3 enumerates the devices, after sending an Inquiry command, it then erroneously sends an Inquiry command with the EVPD bit set to the SEP device. However, the SATA-II SEP devices do not support the EVPD option. The Inquriy with EVPD bit results in a Check-Condition and the Windows driver would notice the LogInfo and then create an entry in the Windows Event Log. This event log message has been supressed
5) Added support for 2TB volumes
繁體中文版
00.10.49.00.06.12.02.00, A02
發佈日期
10 4月 2007
下載類型
韌體
類別
SAS 非 RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： FRMW_WIN_R149730.EXE
檔案大小： 2.13 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
1A58208A51064A936EBE692DC0183EF7
檔案格式： 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱： BR149730.exe
檔案大小： 862.23 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
7b8217c862880a9bcb24ea550bbd18aa
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： FRMW_LX_R149730.BIN.sign
檔案大小： 194 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
2FEF96DD083F2B97D08A1456645D6958
檔案格式： ZipPack 外接
檔案名稱： R149730.EXE
檔案大小： 709.96 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
檔案格式： 外部版本資訊
檔案名稱： SAS5ii_external_a02.txt
檔案大小： 6.49 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： FRMW_LX_R149730.BIN
檔案大小： 1.69 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
A188D9C0FE6AE664E0CB491E0F81F72A
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
NOTE : Flashing back to the previous 6.40 firmware will cause the controller to become inoperable
適用於
SAS 5/i Integrated
SAS 5i/ Integrated
安裝指示
Instructions for R149730.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
NOTE : Zip packs cannot be used to flash multiple SAS5 Adapters. If multiple adapters need to be flashed, please use the releases or Update Packages.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute batch file to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Instructions for BR149730.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Instructions for SAS5ii_external_a02.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Instructions for FRMW_WIN_R149730.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Instructions for FRMW_LX_R149730.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./FRMW_LX_R149730.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./FRMW_LX_R149730.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R149730.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R149730.BIN.sign
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
NOTE : Zip packs cannot be used to flash multiple SAS5 Adapters. If multiple adapters need to be flashed, please use the releases or Update Packages.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute batch file to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Instructions for BR149730.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Instructions for SAS5ii_external_a02.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Instructions for FRMW_WIN_R149730.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Instructions for FRMW_LX_R149730.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./FRMW_LX_R149730.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./FRMW_LX_R149730.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R149730.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R149730.BIN.sign